Am 06/10/2011 09:41 AM, schrieb Laurent Gauch: >> >> Hello Andreas :-) >> >> On Thu, Jun 9, 2011 at 11:30 PM, Andreas Fritiofson >> <andreas.fritiofson at gmail.com >> <https://lists.berlios.de/mailman/listinfo/openocd-development>> wrote: >> >>/ I have created simple quit() that sets all port pins high and as >> input >> />>/ (mpsse command 0x80 0x82) but that did not shut down the yellow led >> />>/ :-( >> />/ >> />/ Since the suitable setting depends on the mapping of the GPIOs >> and the >> />/ surrounding electronics, the quit function would probably need to >> be layout >> />/ specific, as Laurent mentioned. >> / >> I think setting all pint as input create Hi-Z for them, so his is the >> safest choice and _should_ produce situation as if the interface was >> not connected at all... unless interface use some buggy buffer >> construction where high impedance would cause output to be active. I >> thought that was what Laurent mentioned... it sounds sensible, but >> maybe I did some error somewhere... >> > That's make the openocd inter-session more robust. > I have mentioned this trouble from a long time (4-5months ago). The > sebastien patch 1..5/5 resolve all of this. In what way?
If OpenOCD had trouble on startup if the dongle state is unknown, then that needs to be fixed - you never know which other software used the dongle before. Messing with the target state in exit just to fix a bug in startup is only a band-aid, and completely unnecessary if we fix the startup problem. cu Michael _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
