On Fri, Mar 25, 2011 at 1:41 PM, Laurent Gauch <laurent.ga...@amontec.com> wrote: > I did not reproduce your trouble, but we already see "couldn't read enough > bytes from FT2232 device ", when we started with the JTAGkey-2 (FT2232H), > but is was coming from a too old driver, bugged with the FT2232H part. > But this should not be your trouble, since you work with updated drivers. No I am not. I already wrote that I can not run the Linux drivers you have sent. Not only that there are numerous buld troubles, but it can not be run at all as I described here : http://lists.berlios.de/pipermail/openocd-development/2011-March/018343.html
So I am still using libftdi. With older version of libftd2xx (which can be run) I have the same problem. > Also, the JTAGkey-2 is not your trouble since everything else is stable for > you (other target board ... jtag chain detection ...), and since you do not > use RTCK ... > > Question: > ---------- > Do you run openocd on 64bits or 32bits host machine ? > ( Amontec Team is seeing some troubles with 64bits host machine running > openocd this week , STM32 flash error and others errors. 32 bit. BR, Drasko _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
