On Fri, Mar 25, 2011 at 1:02 PM, Andrew Lyon <andrew.l...@gmail.com> wrote: > On Fri, Mar 25, 2011 at 11:40 AM, Drasko DRASKOVIC > <drasko.drasko...@gmail.com> wrote: >> Hi Andy, >> thank you for these tests, it is very helpful. The problem you have >> can be easily solved by applying David Claffey's patches. > > I have applied them and recompiling now to test again, but looking at > the source they will only fix memory read/write, not the other > problems I mentioned with step and resume, perhaps they need similar > fixes? This might be fixed, because OpenOCD probably uses these functions to write bkpt instructions... I do not know, still did not test - I'll do it right now and report back.
>> I see that mips32_pracc_fastdata_xfer() works well for you - I'll >> take a look why it does not work for me and elaborate on the list. >> >> Also, I can see that you are not facing the problem which I have : >> >> Error: couldn't read enough bytes from FT2232 device (0 < 5) >> Error: couldn't read from FT2232 >> Error: register read failed >> >> Since Laurent from Amontec is capable of reproducing the same problem, >> it might be something related to Amontec dongle I am using, but there >> is small chance. >> >> Which dongle are you using ? > > Its a guruplug jtag module > http://www.globalscaletechnologies.com/p-28-guruplug-jtag.aspx > > Have you tried using libftxx instead of libftdi? Yes, same problem... BR, Drasko _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
