I have : 1) Amotnec JTAGkey-2 and 2) Amontec JTAGkey Tiny
BR, Drasko On Fri, Mar 18, 2011 at 12:14 PM, Laurent Gauch <laurent.ga...@amontec.com> wrote: > Drasko DRASKOVIC wrote: >> >> Hello Laurent, >> I have trouble compiling your driver in static (I copied libe from >> build/i386 to stati_lib): >> checking whether standard drivers can be built... yes >> checking uninstalled ftd2xx distribution... >> -L/home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib >> >> /home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib/libftd2xx.a >> checking whether ftd2xx library works... configure: error: Cannot >> build & run test program using ftd2xx.lib >> [1] 22996 exit 1 ./configure --disable-werror --enable-verbose >> --enable-verbose-jtag-io >> [ddraskovic@lardos:/home/ddraskovic/sandbox/openocd-0.5.0/openocd]>ls >> >> /home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib/libftd2xx.a >> >> /home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib/libftd2xx.a >> [ddraskovic@lardos:/home/ddraskovic/sandbox/openocd-0.5.0/openocd]> >> >> >> When compiled shared, I run into this standard libftd2xx compiling >> error produced by libtool shuffling of libs order, but this can be >> fixed as explained here : >> >> http://albertoembedded.wordpress.com/2010/03/16/openocd-with-amontec-jtagkey2-support/ >> >> http://andrey.mikhalchuk.com/2009/06/03/solving-libopenocdso-undefined-reference-to-ft_getlatencytimer-problem-during-openocd-compilation.html >> >> Finally, when I run OpenOCD with this driver I am getting : >> >> Debug: 168 19 command.c:364 register_command_handler() 103584: >> registering 'ocd_reset_nag'... >> Debug: 169 19 ft2232.c:2433 ft2232_init() 104216: ft2232 interface >> using shortest path jtag state transitions >> Debug: 170 19 ft2232.c:2133 ft2232_init_ftd2xx() 104216: 'ft2232' >> interface using FTD2XX with 'jtagkey' layout (0403:cff8) >> Error: 171 34 ft2232.c:2239 ft2232_init_ftd2xx() 137400: unable to get >> latency timer: 4 >> Debug: 172 84 command.c:638 run_command() 137336: Command failed with >> error code -100 >> >> >> I however compiled OpenOCD with official libftd2xx0.4.16 - it compiles >> quite fine both static and shared (for shred there is mentioned >> problem in the end). >> When run with this driver, there are no problems with latency timer. >> However, problem : couldn't read enough bytes from FT2232 device (0 < >> 5) still persist. >> >> Can you point me how to override the problems with compilation with >> Amontec driver ? >> >> Best regards, >> Drasko >> >> On Thu, Mar 17, 2011 at 5:23 PM, Laurent Gauch >> <laurent.ga...@amontec.com> wrote: >> >>> >>> Try with d2xx Linux driver attached. >>> >>> Compile with d2xx support >>> >>> Regards, >>> Laurent Gauch >>> http://www.amontec.com Amontec JTAGkey-3 coming soon ! Generic USB JTAG >>> CJTAG SWD SWO serial wire debug interface 1.5V 1.8V 2.5V 3.3V 5V >>> auto-sense >>> protected IOs With RTCK support >>> maximum 30Mhz JTAG TCK frequeny >>> >>> >>> >>> Drasko DRASKOVIC wrote: >>> >>>> >>>> On Thu, Mar 17, 2011 at 4:53 PM, Laurent Gauch >>>> <laurent.ga...@amontec.com> wrote: >>>> >>>> >>>>> >>>>> I am waiting on the log using the Amontec JTAGkey d2xx WHQL certified >>>>> driver >>>>> . Maybe we will see something different, in this case it is a trouble >>>>> in >>>>> the libftdi . If the same some trouble in the higher JTAG level in >>>>> openocd >>>>> source. >>>>> >>>>> >>>> >>>> It is only Windows driver right ? That would say that I must find now >>>> Windows machine and compile latest OpenOCD for Windows... This will >>>> take some time. >>>> >>>> BR, >>>> Drasko >>>> >>>> >>> >>> > > For the driver, I will see this afternoon. > > What JTAGkey dongle do you have ? > > Generation - 2 > Amotnec JTAGkey-2 > Amontec JTAGkey-2P > > Generation - 1 > Amontec JTAGkey > Amontec JTAGkey Tiny > > If you have a JTAGkey or JTAGkey Tiny do you get the problem : couldn't read > enough bytes from FT2232 device (0 <5), as with the JTAGkey-2 ? > > Regards, > Laurent > > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
