Hello Laurent, I have trouble compiling your driver in static (I copied libe from build/i386 to stati_lib): checking whether standard drivers can be built... yes checking uninstalled ftd2xx distribution... -L/home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib /home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib/libftd2xx.a checking whether ftd2xx library works... configure: error: Cannot build & run test program using ftd2xx.lib [1] 22996 exit 1 ./configure --disable-werror --enable-verbose --enable-verbose-jtag-io [ddraskovic@lardos:/home/ddraskovic/sandbox/openocd-0.5.0/openocd]>ls /home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib/libftd2xx.a /home/ddraskovic/sandbox/libftd2xx_laurent/libftd2xx1.0.4/static_lib/libftd2xx.a [ddraskovic@lardos:/home/ddraskovic/sandbox/openocd-0.5.0/openocd]>
When compiled shared, I run into this standard libftd2xx compiling error produced by libtool shuffling of libs order, but this can be fixed as explained here : http://albertoembedded.wordpress.com/2010/03/16/openocd-with-amontec-jtagkey2-support/ http://andrey.mikhalchuk.com/2009/06/03/solving-libopenocdso-undefined-reference-to-ft_getlatencytimer-problem-during-openocd-compilation.html Finally, when I run OpenOCD with this driver I am getting : Debug: 168 19 command.c:364 register_command_handler() 103584: registering 'ocd_reset_nag'... Debug: 169 19 ft2232.c:2433 ft2232_init() 104216: ft2232 interface using shortest path jtag state transitions Debug: 170 19 ft2232.c:2133 ft2232_init_ftd2xx() 104216: 'ft2232' interface using FTD2XX with 'jtagkey' layout (0403:cff8) Error: 171 34 ft2232.c:2239 ft2232_init_ftd2xx() 137400: unable to get latency timer: 4 Debug: 172 84 command.c:638 run_command() 137336: Command failed with error code -100 I however compiled OpenOCD with official libftd2xx0.4.16 - it compiles quite fine both static and shared (for shred there is mentioned problem in the end). When run with this driver, there are no problems with latency timer. However, problem : couldn't read enough bytes from FT2232 device (0 < 5) still persist. Can you point me how to override the problems with compilation with Amontec driver ? Best regards, Drasko On Thu, Mar 17, 2011 at 5:23 PM, Laurent Gauch <laurent.ga...@amontec.com> wrote: > Try with d2xx Linux driver attached. > > Compile with d2xx support > > Regards, > Laurent Gauch > http://www.amontec.com Amontec JTAGkey-3 coming soon ! Generic USB JTAG > CJTAG SWD SWO serial wire debug interface 1.5V 1.8V 2.5V 3.3V 5V auto-sense > protected IOs With RTCK support > maximum 30Mhz JTAG TCK frequeny > > > > Drasko DRASKOVIC wrote: >> >> On Thu, Mar 17, 2011 at 4:53 PM, Laurent Gauch >> <laurent.ga...@amontec.com> wrote: >> >>> >>> I am waiting on the log using the Amontec JTAGkey d2xx WHQL certified >>> driver >>> . Maybe we will see something different, in this case it is a trouble in >>> the libftdi . If the same some trouble in the higher JTAG level in >>> openocd >>> source. >>> >> >> It is only Windows driver right ? That would say that I must find now >> Windows machine and compile latest OpenOCD for Windows... This will >> take some time. >> >> BR, >> Drasko >> > > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
