From: Spencer Oliver <ntfr...@users.sourceforge.net>
The flash bank name is a required element in adding flash banks,
however other than looking at the config file there is no way of
getting the name used in openocd.
Signed-off-by: Spencer Oliver <ntfr...@users.sourceforge.net>
---
src/flash/nor/tcl.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c
index 142f31f..fe1f85d 100644
--- a/src/flash/nor/tcl.c
+++ b/src/flash/nor/tcl.c
@@ -853,9 +853,9 @@ COMMAND_HANDLER(handle_flash_banks_command)
unsigned n = 0;
for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++)
{
- LOG_USER("#%" PRIu32 " : %s at 0x%8.8" PRIx32 ", size 0x%8.8"
PRIx32 ", "
+ LOG_USER("#%" PRIu32 " : %s (%s) at 0x%8.8" PRIx32 ", size
0x%8.8" PRIx32 ", "
"buswidth %u, chipwidth %u", p->bank_number,
- p->driver->name, p->base, p->size,
+ p->name, p->driver->name, p->base, p->size,
p->bus_width, p->chip_width);
}
return ERROR_OK;
--
1.7.1
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
