Hello, Anyone here have suggestions?
Thanks! Jon.
--- Begin Message ---Hello, Has anyone managed to get the TinCanTools Flyswatter working with the XM? I did with the original Beagle, but upstream OCD does this with XM: [...@constitution openocd]$ sudo /usr/local/bin/openocd -s /usr/local/lib/openocd -f /usr/local/share/openocd/scripts/interface/flyswatter.cfg -f /usr/local/share/openocd/scripts/board/ti_beagleboard_xm.cfg Open On-Chip Debugger 0.5.0-dev-00620-g1892a2b (2010-11-24-13:01) Licensed under GNU GPL v2 For bug reports, read http://openocd.berlios.de/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' 10 kHz Warn : dm37x.dsp: huge IR length 38 trst_only separate trst_push_pull Info : clock speed 10 kHz Info : JTAG tap: dm37x.jrc tap/device found: 0x0b89102f (mfg: 0x017, part: 0xb891, ver: 0x0) Info : JTAG tap: dm37x.dap enabled Warn : Found broken CPU (imx51), trying to fixup ROM Table location from 0x80000000 to 0x60000000 Error: JTAG-DP STICKY ERROR Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x60000000 Polling target failed, GDB will be halted. Polling again in 100ms Polling target failed, GDB will be halted. Polling again in 300ms Polling target failed, GDB will be halted. Polling again in 700ms Polling target failed, GDB will be halted. Polling again in 1500ms Polling target failed, GDB will be halted. Polling again in 3100ms Polling target failed, GDB will be halted. Polling again in 6300ms etc. I haven't had chance to look at the code yet, but I think some of the broken CPU detection/fixup stuff has changed recently. Still, the warning about the IMX51 is concerning. What ROM table is it referring to exactly? Is this something on the Flyswatter board? Does anyone happen to know these things before I go digging? (I used to use BDI2000s but they're a little expensive for home...not a huge OCD user yet). Jon. -- You received this message because you are subscribed to the Google Groups "Beagle Board" group. To post to this group, send email to beaglebo...@googlegroups.com. To unsubscribe from this group, send email to beagleboard+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
--- End Message ---
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
