I am sorry, this is log of the latest version (I forget to disable the MMU of the previos mail) (you can see that: when the break point can't work, I use "halt" to stop, the cpu mode is "Undefined instruction", does not openocd replace the actual instruction at the breakpoint ?).
Open On-Chip Debugger > load_image leds/leds_elf 156 bytes written at address 0x00000000 downloaded 156 bytes in 0.000000s (inf KiB/s) > resume > halt target state: halted target halted in ARM state due to debug-request, current mode: Supervisor cpsr: 0x800000d3 pc: 0x0000006c MMU: disabled, D-Cache: disabled, I-Cache: disabled > bp 0x78 4 breakpoint set at 0x00000078 > resume target state: halted target halted in ARM state due to breakpoint, current mode: Supervisor cpsr: 0x800000d3 pc: 0x00000078 MMU: disabled, D-Cache: disabled, I-Cache: disabled > resume > halt target state: halted target halted in ARM state due to debug-request, current mode: Undefined instruc tion cpsr: 0x800000db pc: 0x00000004 MMU: disabled, D-Cache: disabled, I-Cache: disabled > version Open On-Chip Debugger 0.5.0-dev-snapshot (2010-11-18-18:00) > >>Please try with the latest master branch. >> >>Thanks! >> >>-- >>Øyvind Harboe >> >>Can Zylin Consulting help on your project? >> >>US toll free 1-866-980-3434 / International +47 51 63 25 00 >> >>http://www.zylin.com/zy1000.html >>ARM7 ARM9 ARM11 XScale Cortex >>JTAG debugger and flash programmer > >= = = = = = = = = = = = = = = = = = = = > > > 致 >礼！ > > > 韦东山 > ds...@ustc.edu > 2010-11-18 >_______________________________________________ >Openocd-development mailing list >Openocd-development@lists.berlios.de >https://lists.berlios.de/mailman/listinfo/openocd-development = = = = = = = = = = = = = = = = = = = = 致 礼！ 韦东山 ds...@ustc.edu 2010-11-18 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
