I compare the log and source code between the latest openocd and the old r717, and can't find the problem. They do the same thing below when "resume" : 1. unset breakpoint 0x7c 2. enable single-step 3. (do the single-step ?) 4. disable single-step 5. entered debug state at PC 0x80 6. set breakpoint at 0x0000007c
with the latest openocd, when breaked at the first time, I "rbp ..." and "bp ..." again, and then "resume", it can breaked again. Maybe there are something wrong at "set breakpoint again". >On Thu, Nov 18, 2010 at 11:18 AM, 韦东山 <ds...@ustc.edu> wrote: >> Øyvind_Harboe, gdb is ok. I want to use telnet interface. > >The telnet bp commands is a less trodden path I suppose. > >Did you read up on the source code? > >-- >Øyvind Harboe > >Can Zylin Consulting help on your project? > >US toll free 1-866-980-3434 / International +47 51 63 25 00 > >http://www.zylin.com/zy1000.html >ARM7 ARM9 ARM11 XScale Cortex >JTAG debugger and flash programmer = = = = = = = = = = = = = = = = = = = = 致 礼！ 韦东山 ds...@ustc.edu 2010-11-18 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
