On Monday 25 October 2010 11:38:53 Moshe Artzi wrote: > Hi Marek, > > Sorry for the interrupt but, > I'm still can't make this thing work..... > > After nand the image I get this error: > "Failed to receiving data from debug handler after 1000 attempts Command > handler execution failed in procedure 'resume'" > > From my understanding, this is timing issue between the PXA320 and the Jtag > but, I can't find the parameter/s that can cause this problem. > > > Here is command line session print screen: > > Open On-Chip Debugger 0.5.0-dev-snapshot (2010-10-25-09:14) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.berlios.de/doc/doxygen/bugs.html > Info : only one transport option; autoselect 'jtag' > adapter_nsrst_delay: 260 > jtag_ntrst_delay: 250 > Info : colibri_pxa320.cpu: hardware has 2 breakpoints and 2 watchpoints > adapter_nsrst_delay: 2000 > trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain > 200 kHz > Info : device: 4 "2232C" > Info : deviceID: 67358712 > Info : SerialNumber: T1TA5HKBA > Info : Description: Amontec JTAGkey A > Info : clock speed 200 kHz > Info : JTAG tap: colibri_pxa320.cpu tap/device found: 0x7e642013 (mfg: > 0x009, part: 0xe642, ver: 0x7) Info : accepting 'telnet' connection from > 4444 > Info : JTAG tap: colibri_pxa320.cpu tap/device found: 0x7e642013 (mfg: > 0x009, part: 0xe642, ver: 0x7) target state: halted > target halted in ARM state due to debug-request, current mode: Supervisor > cpsr: 0xf80000d3 pc: 0x00000000 > MMU: disabled, D-Cache: disabled, I-Cache: disabled > (processor reset) > 1472 bytes written at address 0x5c040000 > downloaded 1472 bytes in 0.094000s (15.293 KiB/s) > Error: Failed to receiving data from debug handler after 1000 attempts > Command handler execution failed > in procedure 'resume' > > > Here is telnet session print screen: > > Open On-Chip Debugger > > > reset halt ;load_image iplntim.bin 0x5c040000 ;resume 0x5c040000 > > JTAG tap: colibri_pxa320.cpu tap/device found: 0x7e642013 (mfg: 0x009, > part: 0xe642, ver: 0x7) target state: halted > target halted in ARM state due to debug-request, current mode: Supervisor > cpsr: 0xf80000d3 pc: 0x00000000 > MMU: disabled, D-Cache: disabled, I-Cache: disabled > (processor reset) > 1472 bytes written at address 0x5c040000 > downloaded 1472 bytes in 0.094000s (15.293 KiB/s) > Failed to receiving data from debug handler after 1000 attempts > Command handler execution failed > in procedure 'resume' > > > I'm getting frustrated !!! ;(
Hey, sorry ... I really don't know how to help you. It looks like the core halted, but it won't start at the specified address. For me, it always helped to powerdown and power-up the board. Sorry once again > > Any assist will be blessed, > > Thanks, > > Moshe. _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
