Dne Čt 21. října 2010 11:46:46 Moshe Artzi napsal(a): > Hi, > > After trying every possible option, using the last OpenOCD version and > applied all the OpenOCD patches I got to this situation: > > ******************This is the commandLine: > > C:\Program Files\OpenOCD>openocd > Open On-Chip Debugger 0.5.0-dev-snapshot (2010-10-21-10:24) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.berlios.de/doc/doxygen/bugs.html > Info : only one transport option; autoselect 'jtag' > adapter_nsrst_delay: 260 > jtag_ntrst_delay: 250 > Info : colibri_pxa320.cpu: hardware has 2 breakpoints and 2 watchpoints > adapter_nsrst_delay: 800 > trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain > adapter_nsrst_assert_width: 40 > adapter_nsrst_delay: 1500 > 2000 kHz > Info : device: 4 "2232C" > Info : deviceID: 67358712 > Info : SerialNumber: T1TA5HKBA > Info : Description: Amontec JTAGkey A > Info : clock speed 2000 kHz > Info : JTAG tap: colibri_pxa320.cpu tap/device found: 0x7e642013 (mfg: > 0x009, part: 0xe642, ver: 0x7) > > > ******************This is the telnet: > > Open On-Chip Debugger > > > nand list > > #0: not probed > > > nand probe 0 > > TIMEOUT waiting for NDSR mask 00000100 ; NDSR = 00000001 > > TIMEOUT waiting for NDSR mask 00000100 ; NDSR = 00000001 > > TIMEOUT waiting for NDSR mask 00000002 ; NDSR = 00000001 > > unknown NAND flash device found, manufacturer id: 0xff device id: 0xe7 > Command handler execution failed > in procedure 'nand' > > > Can't find what is wrong with this nand memory!!! > In the command line it recognized but when I'm trying to probe it fails > because of TIMEOUTS.
I told you the NAND driver is buggy and that you should really use uboot to reflash. Any fixes for this nand driver are welcome though. Cheers > > Any assist will be welcome. > > Thanks, > > Moshe. > > -----Original Message----- > From: Moshe Artzi [mailto:mosh...@niron-sys.com] > Sent: Thursday, October 21, 2010 9:51 AM > To: 'Marek Vasut' > Cc: 'Takács Áron'; 'Gena Chap'; 'openpxa-us...@lists.sourceforge.net'; > 'openocd-development@lists.berlios.de'; 'Øyvind Harboe' Subject: RE: > OpenOCD on colibri PXA 320 With Amontec tiny JTAG issue > > > Thank you for your reply, > > I will give it a try and will let you know how is going. > > Thank you, > > Moshe. > > -----Original Message----- > From: Marek Vasut [mailto:marek.va...@gmail.com] > Sent: Wednesday, October 20, 2010 6:49 PM > To: Moshe Artzi > Cc: 'Takács Áron'; 'Gena Chap'; openpxa-us...@lists.sourceforge.net; > openocd-development@lists.berlios.de; Øyvind Harboe Subject: Re: OpenOCD > on colibri PXA 320 With Amontec tiny JTAG issue > > Dne St 20. října 2010 18:41:47 Moshe Artzi napsal(a): > > Hehehehe, > > > > Yepp, I compiled it in Cygwin for WIN32 ;) > > > > Thank you very much for your reply, > > > > It's OpenOCD Ver 0.4.0 (the last release I found (, > > I hope I'm not missing something on the way, > > There are only 3 PXA320 patches for OpenOCD am I right? > > > > I just can't find the correct NAND driver for this NAND (SAMSUNG > > K9K8G08U0B) chip. > > It doesn't matter which chip you use, you have to use the pxa3xx_nand > driver. The chip is more or less autodetected. > > Here's the git repo for openocd > git://openocd.git.sourceforge.net/gitroot/openocd/openocd > > > Thanks, > > Moshe. > > > > -----Original Message----- > > From: Marek Vasut [mailto:marek.va...@gmail.com] > > Sent: Wednesday, October 20, 2010 6:26 PM > > To: Moshe Artzi > > Cc: 'Takács Áron'; 'Gena Chap'; openpxa-us...@lists.sourceforge.net > > Subject: Re: OpenOCD on colibri PXA 320 With Amontec tiny JTAG issue > > > > Dne St 20. října 2010 16:39:00 Moshe Artzi napsal(a): > > > Hi there again, > > > > > > I'm facing an issue when I'm trying to nand the u-boot image to the > > > colibri's PXA320, > > > > > > I applied the PXA 320 patches for openocd, > > > > > But when I'm connecting to the target using the Jtag I get this message: > > Hi, you should use newer version of OpenOCD . Either way though, the NAND > > driver is a bit broken (someone should really fix it). You also need to > > add the driver into the configuration file. > > > > Btw. you compiled OpenOCD on windows ? yikes > > > > > C:\Program Files\OpenOCD>openocd.exe > > > Open On-Chip Debugger 0.4.0 (2010-10-20-14:49) > > > Licensed under GNU GPL v2 > > > For bug reports, read > > > > > > http://openocd.berlios.de/doc/doxygen/bugs.html > > > > > > jtag_nsrst_delay: 260 > > > jtag_ntrst_delay: 250 > > > Info : colibri_pxa320.cpu: hardware has 2 breakpoints and 2 watchpoints > > > jtag_nsrst_delay: 800 > > > trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain > > > Error: No valid NAND flash driver found (pxa3xx) > > > > > > Available NAND flash controller drivers: > > > nonce > > > davinci > > > lpc3180 > > > orion > > > s3c2410 > > > s3c2412 > > > s3c2440 > > > s3c2443 > > > s3c6400 > > > imx31 > > > at91sam9 > > > > > > Info : device: 4 "2232C" > > > Info : deviceID: 67358712 > > > Info : SerialNumber: T1TA5HKBA > > > Info : Description: Amontec JTAGkey A > > > Info : clock speed 6000 kHz > > > Info : JTAG tap: colibri_pxa320.cpu tap/device found: 0x7e642013 (mfg: > > > 0x009, part: 0xe642, ver: 0x7) > > > > > > My openocd.cfg file is: > > > > > > source [find interface/jtagkey-tiny.cfg] > > > source [find target/colibri_pxa320.cfg] > > > > > > Any help will be appreciated, > > > > > > Thanks, > > > > > > Moshe Artzi > > > Software engineer > > > > > > Niron systems > > > Tel : 09-7407626 > > > Ex : 104 > > > Fax: 09-8651510 > > > Mobile : 050-3356312 > > > Email : mosh...@niron-sys.com > > > Site: www.niron-sys.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
