On Mon, Aug 2, 2010 at 11:36 PM, Alain Mouette <ala...@pobox.com> wrote: > Could anyone give (or point to) an example of a flash for Cortex-M3 that > first chenges the internal cpu clock to 50MHz, then changes OpenOCD clock to > 12MHz and only then writes the flash?
This depends *entirely* on the part and peripheral registers and not the Cortex-M3 core as such. You have to dig up the datasheets for the part you have and find the algorithm(?) to set up a faster clock. Do you have a "poke sequence" to set up the clock for your part? -- Øyvind Harboe US toll free 1-866-980-3434 / International +47 51 63 25 00 http://www.zylin.com/zy1000.html ARM7 ARM9 ARM11 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
