Andreas Fritiofson wrote: > On Mon, May 31, 2010 at 3:13 PM, Kenan Özdemir <gla...@hotmail.de> > wrote:
>> target remote localhost:3333 >> monitor reset halt > This looks a bit strange. Nowadays, 'reset init' seems to be preferred > over 'reset halt'. I don't really know the difference but feel it > works better. AFAIK the difference is that 'reset init' does the same as 'reset halt', then runs the reset-init event handler, which may be defined for your board to do things like setup PLLs, DRAM controller, pin muxing, etc. like a basic bootloader. This is helper stuff as out of reset off-chip DRAM is probably inaccessible. -- Jon Povey jon.po...@racelogic.co.uk Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
