Hi Guys,
I have the following problem..
Each time I try to Debug I got this Error Message it is out of my logfile..
Debug: 3397 39766 arm_adi_v5.c:335 jtagdp_transaction_endcheck(): jtag-dp:
CTRL/STAT error, 0xf0000021
Error: 3398 39766 arm_adi_v5.c:361 jtagdp_transaction_endcheck(): JTAG-DP
STICKY ERROR
Debug: 3399 39766 arm_adi_v5.c:373 jtagdp_transaction_endcheck(): jtag-dp:
CTRL/STAT 0xf0000001
Error: 3400 39766 arm_adi_v5.c:380 jtagdp_transaction_endcheck(): MEM_AP_CSW
0x23000052, MEM_AP_TAR 0xfffffffc
Debug: 3401 39781 arm_adi_v5.c:335 jtagdp_transaction_endcheck(): jtag-dp:
CTRL/STAT error, 0xf0000021
Error: 3402 39781 arm_adi_v5.c:361 jtagdp_transaction_endcheck(): JTAG-DP
STICKY ERROR
Debug: 3403 39781 arm_adi_v5.c:373 jtagdp_transaction_endcheck(): jtag-dp:
CTRL/STAT 0xf0000001
Error: 3404 39781 arm_adi_v5.c:380 jtagdp_transaction_endcheck(): MEM_AP_CSW
0x23000052, MEM_AP_TAR 0xfffffffc
Warn : 3405 39781 arm_adi_v5.c:989 mem_ap_read_buf_u32(): Block read error
address 0xfffffff8, count 0x1
I'm using the Stm32-p103 board from Olminex with the Cortex M3, Eclipse,
OpenOCD 0.4.0 and the standard config files for stm32 supported by oocd 0.4.0
here are my GDB commands:
target remote localhost:3333
monitor reset halt
monitor stm32x mass_erase 0
monitor stm32x options_read 0
monitor stm32x unlock 0
monitor reset
monitor flash write_image main.bin 0x8000000 bin
file main.out
load main.out
break main
I try to solve this problem for weeks.. thx for any help
_________________________________________________________________
http://redirect.gimas.net/?n=M1005xGreetings2
Machen Sie anderen eine digitale Geburtstagsfreude: kostenlos!_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
