The Redbee USB is a small formfactor usb stick from Redwire, LLC
(www.redwirellc.com/store), that incorporates a Freescale MC13224V
ARM7TDMI + 802.15.4 radio and an FT2232H.
Channel B is connected to the mc13224v's JTAG interface and Channel A
is connected to UART1.
Additional features are:
- onboard ceramic chip antenna
- USB-A connector
- powered from USB
- 2x LEDS
---
src/jtag/drivers/ft2232.c | 5 +++++
tcl/board/redbee-usb.cfg | 8 ++++++++
2 files changed, 13 insertions(+), 0 deletions(-)
create mode 100644 tcl/board/redbee-usb.cfg
diff --git a/src/jtag/drivers/ft2232.c b/src/jtag/drivers/ft2232.c
index 3213851..3a51e13 100644
--- a/src/jtag/drivers/ft2232.c
+++ b/src/jtag/drivers/ft2232.c
@@ -269,6 +269,11 @@ static const struct ft2232_layout ft2232_layouts[] =
.init = redbee_init,
.reset = redbee_reset,
},
+ { .name = "redbee-usb",
+ .init = redbee_init,
+ .reset = redbee_reset,
+ .channel = INTERFACE_B,
+ },
{ .name = NULL, /* END OF TABLE */ },
};
diff --git a/tcl/board/redbee-usb.cfg b/tcl/board/redbee-usb.cfg
new file mode 100644
index 0000000..15b23a5
--- /dev/null
+++ b/tcl/board/redbee-usb.cfg
@@ -0,0 +1,8 @@
+source [find target/mc13224v.cfg]
+
+# The redbee-econotag has an onboard ft2232h with channel B wired
+# to the JTAG pins on the mc13224v
+# channel A is wired to UART1
+interface ft2232
+ft2232_layout redbee-usb
+ft2232_vid_pid 0x0403 0x6010
--
1.5.6.5
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
