On Sat, Feb 20, 2010 at 3:25 AM, CeDeROM <tomek.ce...@gmail.com> wrote:
> I have searched a bit and it looks that new JLink costs about 250EUR > that if far too much for me for one-time-use. But I have searched a > bit and found something like below - I would be grateful for more > details (especially JLink/JLink2 differences): There is no J-Link 2. It is ULink2. > http://cgi.ebay.com/ARM-Emulator-Ulink2-ARM-JTAG-USB-Ulink2_W0QQitemZ130327727670QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1e58234e36 I think this might be an illegal clone version of Keil ULink2. http://www.keil.com/ulink2/ I think it is not supported by OpenOCD and will only work under Keil's uVision IDE. > http://cgi.ebay.com/LPC2142-PHILIPS-ARM7-development-board-start-kit-Jlink7_W0QQitemZ130324050204QQcmdZViewItemQQptZBI_Electrical_Equipment_Tools?hash=item1e57eb311c I think this is an illegal clone version of Segger J-Link which could be found at about US$20 in some part of the world. After all the hardware cost is low. The value is in the firmware/software/support. > http://www.kamami.pl/index.php?ukey=product&productID=45417 Original Sam-ICE is Atmel OEM version of Segger J-Link. If you use IAR EWARM, it is locked to Atmel's MCU only. I have no idea whether this is an official one or a clone. -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
