Hello all! On Fri, Feb 19, 2010 at 10:36 AM, Xiaofan Chen <xiaof...@gmail.com> wrote: > On Fri, Feb 19, 2010 at 5:00 PM, Spencer Oliver <s...@spen-soft.co.uk> wrote: > >> The latest jlink version i have here is v8. >> > > That is quite new. Here at work I have seen a few V3 (IAR), many V6 > (Segger, IAR and Atmel Sam-ICE), V7 (Analog Device mIDAS-Link) > and one or two V8 units. We also got one J-Link Pro with the Ethernet > (...)
I have searched a bit and it looks that new JLink costs about 250EUR that if far too much for me for one-time-use. But I have searched a bit and found something like below - I would be grateful for more details (especially JLink/JLink2 differences): http://cgi.ebay.com/ARM-Emulator-Ulink2-ARM-JTAG-USB-Ulink2_W0QQitemZ130327727670QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1e58234e36 http://cgi.ebay.com/LPC2142-PHILIPS-ARM7-development-board-start-kit-Jlink7_W0QQitemZ130324050204QQcmdZViewItemQQptZBI_Electrical_Equipment_Tools?hash=item1e57eb311c http://www.kamami.pl/index.php?ukey=product&productID=45417 I could try to work out this kind of cable || sniff/dump some operations to someone (Spen? Xiao?) for anlysis (the reader/viewer is free) - this depends on my time || cable availability depending on needs :-) Also to avoid doing thousand things at time (that is unfortunately already happening to me) I would prefer to first try the SWD working (code), then make FT2232 cable, then RLink cable (I have one), then other versions/cables, so currently I dont get to other tasks until those are finished. But there could be a support for parallel work on other cables (I can't manage all this myself in sensible time) - and here I can help in dumping transfers at physical layer :-) Best regards! :-) Tomek Cedro Best regards, Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
