This must have got messed up with cfg changes a while back.
Cheers
Spen
>From f899c2aa9767ba7bf731e6c6c1af2c437af97dac Mon Sep 17 00:00:00 2001
From: Spencer Oliver <ntfr...@users.sourceforge.net>
Date: Tue, 9 Feb 2010 14:49:47 +0000
Subject: [PATCH] str730.cfg: fix incorrect mem regions
- update str73x mem regions to correct values.
Signed-off-by: Spencer Oliver <ntfr...@users.sourceforge.net>
---
tcl/target/str730.cfg | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg
index cab2338..0917953 100644
--- a/tcl/target/str730.cfg
+++ b/tcl/target/str730.cfg
@@ -46,9 +46,9 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
flash protect 0 0 7 off
}
-$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000
-work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0xA0000000 -work-area-size 0x4000
-work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR3x
+flash bank $_FLASHNAME str7x 0x80000000 0x00040000 0 0 $_TARGETNAME STR3x
--
1.6.5.1.1367.gcd48
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
