Hi, David, Yes, the bugs still exists, i am looking into the codes by myself now, though i'm not familiar with the JTAG protocol.
Hopefully, i can get support from you, or one of the developers, i can provide hardware support if needed. Thanks & Regards. ------------------ zzzh.2007 2009-11-04 ------------------------------------------------------------- Sender：David Brownell Date：2009-11-04 11:43:34 Receiver：openocd-development; zzzh.2007 CC： Topic：Re: [Openocd-development] 0.3.0-rc0: bugs for FA526 core On Tuesday 03 November 2009, zzzh.2007 wrote: > Hi, > > For FA526 core, following bugs exist: > 1. after making a step(in openocd-0.3.0-rc0) at reset vector > (at addr of 0, which is LDR pc 0x5c), the pc did not skip to > 0x5c, but to 0xfc(the instruction at addr of 4 is LDR pc 0x100) Is that issue still open in *current* git? A patch was merged recently that could affect breakpoint handling on arm920t in such situations... > 2. can't step or set break point via gdb commands(next, break). > > > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
