Rolf Meeser pisze: > I had problems with the "reset init" on LPC2478, too. I didn't analyze it > deeply, but I noticed this problem: > > OpenOCD reported that it couldn't halt the target. With debug on, I got the > impression that the EmbeddedICE had been programmed for a break before the > final SRST/TRST happened. There was an attempt to reprogram it afterwards, > but that didn't seem to be complete. > > I've added a call to jtag_add_tlr(), and that solved it for me. > All relevant EmbeddedICE registers are now reprogrammed. > > It looks like there's some internal state which didn't notice that the target > hardware got a reset. Seems reasonable to me to have the TAP reset call here, > but I'm not an expert...
Unfortunately your patch doesn't solve my general problem: - with "soft_reset_halt" before "load" programming fails - without "soft_reset_halt" when there is no "load" debugging works wrong /; That's why I prefer STM32 now <: 4\/3!! _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
