Sorry I forgot to attach the files in last mail. ---------- Forwarded message ---------- From: Rohit Chandel <mygalaxy...@gmail.com> Date: Wed, Aug 26, 2009 at 5:53 PM Subject: Re: [Openocd-development] OpenOCD 0.2.0 : Olimex ARM-USB-TINY -> unable to find driver software To: openocd-development <openocd-development@lists.berlios.de>
I tried to use OpenOCD with the very basic test setup for my board (thanks to Michael Fischer). Inside the SAM7S256Test folder you will find a file openocd.cfg. This contains all the "settings" to connect to my target(i.e. Olimex AT91SAM7s256 Board with ARM-USB-TINY(olimex)). Yagarto toolchain is working fine and I was able to use "make clean" and "make all" commands to clean and build the project. But the problem comes when I give "openocd" at cmd line. Michael informed me that on this I should get connected to the Target through OpenOCD. But I get an error message in a new window saying "openocd.exe has stopped working" and the usual message whether to close, debug or look for a online solution. Am I missing something here. i have attached the zip provided by Michael with the mail. Also the inf files I had modified which were sent sometime back and were found to be Ok. Regards Rohit On Wed, Aug 26, 2009 at 2:36 AM, Freddie Chopin <freddie_cho...@op.pl>wrote: > Rohit Chandel pisze: > > Is there any quick test to find out that openocd is installed correctly? > > use it. > > 4\/3!! > _______________________________________________ > Openocd-development mailing list > Openocd-development@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/openocd-development >
SAM7S256Test.7z
Description: Binary data
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
