> > The request *is* standard... > > > as the sequence will not work on a stm32. > > It is implementation dependant, > > .... but SoC vendors don't necessarily handle that one the same. > > (What happens on STM32?) > > > > but is the correct sequence for luminary - > > luminary support helped a lot sorting this problem out. > > The comment in the code elaborates the situation: > > /* Use a standard Cortex-M3 software reset mechanism. > * SYSRESETREQ will reset SoC peripherals outside the > * core, like watchdog timers, if the SoC wires it up > * correctly. Else VECRESET can reset just the core. > */ > > So an STM32 should use VECRESET, and maybe a bunch of > manual resets of the peripherals, if it doesn't have > a SRST wired up. That's what the soft_reset_halt() > does (without peripheral resets). >
yes sorry, probably me misreading your comments. Cheers Spen _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
