On Tue, Jun 23, 2009 at 1:48 AM, Freddie Chopin<freddie_cho...@op.pl> wrote: > Xiaofan Chen pisze: >> >> In this case, I think you do not need the master entry. Please >> try it again with the master entry deleted. > > The master entry (the one without &MI00 and &MI01) is not necessary. > > I attach a changed driver file.
> [Devices] > "FTDI FT2232 (Channel A)"=LIBUSB_DEV, USB\VID_0403&PID_6001&MI_00 > "FTDI FT2232 (Channel B)"=LIBUSB_DEV, USB\VID_0403&PID_6001&MI_01 > > "Amontec JTAGkey (Channel A)"=LIBUSB_DEV, USB\VID_0403&PID_cff8&MI_00 > "Amontec JTAGkey (Channel B)"=LIBUSB_DEV, USB\VID_0403&PID_cff8&MI_01 > > "egnite Turtelizer 2 (Channel A)"=LIBUSB_DEV, USB\VID_0403&PID_bdc8&MI_00 > "egnite Turtelizer 2 (Channel B)"=LIBUSB_DEV, USB\VID_0403&PID_bdc8&MI_01 > > [Devices.NT] > "FTDI FT2232 (Channel A)"=LIBUSB_DEV, USB\VID_0403&PID_6001&MI_00 > "FTDI FT2232 (Channel B)"=LIBUSB_DEV, USB\VID_0403&PID_6001&MI_01 > > "Amontec JTAGkey (Channel A)"=LIBUSB_DEV, USB\VID_0403&PID_cff8&MI_00 > "Amontec JTAGkey (Channel B)"=LIBUSB_DEV, USB\VID_0403&PID_cff8&MI_01 > > "egnite Turtelizer 2 (Channel A)"=LIBUSB_DEV, USB\VID_0403&PID_bdc8&MI_00 > "egnite Turtelizer 2 (Channel B)"=LIBUSB_DEV, USB\VID_0403&PID_bdc8&MI_01 > What if you remove Channel B from the INF file? Will the USB virtual COM port appear again? Will it affect the JTAG channel A for OpenOCD? This will need the SVN version of libusb0.sys according to Freddie. I hope this works. Then it can solve the problems of losing the COM port. Please try it (Michael, Freddie, Gene and others). Thanks. -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
