On Mon, May 25, 2009 at 10:09 AM, Xiaofan Chen <xiaof...@gmail.com> wrote: > Now we are testing other hex file. I believe there may be two issues > involved after Michael fixed the checksum issue for lpc-2148. > > 1) Potential J-Link stability issues. I will check out V6. If it is ok > and V3 is not, then V3/V4 may need some work. I still encounter > startup errors with V3 from time to time. > 2) Reset/Halt/Out-of-Sync issue. Again I will check out V6 to see > if it is better.
No issues any more. It turns out that I need to manually erase the first bank by using "flash erase_sector 0 0 26" before flashing the hex file (please refer to the other thread). Both J-Link V3 and V6 are working now. Thanks a lot for your patches to get V3 working as well. Now I can really get started learning to use OpenOCD. -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
