Hi Alan, First, thanks for your assistance.
At the top of jlink.c and jtag.h are some switches to turn on state machine debugging. Could you turn those on with and without the patch and then send me the output? The state machine debugging is only part of my patch, so if there was any way for you to apply just that part of the patch that would be very helpful. I don't have any ARM9, ARM11 or xscale gear, so it's very hard for me to test this. Sergey, would you be able to help me here since you have the MC1322x and ARM9 gear? Thanks Jeff El Mar 18, 2009, a las 09:25 , Alan Carvalho de Assis escribió: > On Wed, Mar 18, 2009 at 1:16 PM, Alan Carvalho de Assis > <acas...@gmail.com> wrote: >> Hi Jeff, >> >> On Mon, Mar 9, 2009 at 12:05 AM, Jeff Williams >> <je...@gadgetworks.com> wrote: >>> Hi, >>> >>> I've made some changes to OpenOCD to support the Segger JLink for >>> the >>> Freescale MC1322x. >>> >>> I'm working with someone who says that my changes seem more stable >>> for >>> JLink overall, but he also says there might be some issues with ARM9 >>> processors. I'm new to ARM and this community, so I've been >>> struggling a bit to figure out what to do with my patches. >>> >> _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
