Hi

On Wed, Mar 18, 2009 at 1:16 PM, Alan Carvalho de Assis
<acas...@gmail.com> wrote:
> Hi Jeff,
> I tested your patch on i.MX31 (ARM11), then I think your friend was right :-)
>
> # openocd -f interface/axm0432.cfg -f board/imx31pdk.cfg
> Open On-Chip Debugger 1.0 (2009-03-18-12:50) svn:1415M
>
>
> BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
>
>
> $URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $
> jtag_speed: 10
> Info : JTAG tap: imx35.sjc tap/device found: 0xa57201e1 (Manufacturer:
> 0x0f0, Part: 0x5720, Version: 0xa)
> Error: JTAG tap: imx35.sjc             got: 0xa57201e1 (mfg: 0x0f0,
> part: 0x5720, ver: 0xa)
> Error: JTAG tap: imx35.sjc expected 1 of 1: 0x2b900f0f (mfg: 0x787,
> part: 0xb900, ver: 0x2)
> Error: trying to validate configured JTAG chain anyway...
> Error: Could not validate JTAG scan chain, IR mismatch, scan returned
> 0x0C0804. tap=imx35.sjc pos=0 expected 0x1 got 0
> Warn : Could not validate JTAG chain, continuing anyway...
> Warn : TAP imx35.cpu:
> Warn : value captured during scan didn't pass the requested check:
> Warn : captured: 0x00 check_value: 0x01 check_mask: 0x1F
> Warn : in_handler: w/o "in_value", mismatch in SIR
> Warn : TAP imx35.cpu:
> Warn : value captured during scan didn't pass the requested check:
> Warn : captured: 0x00 check_value: 0x01 check_mask: 0x1F
> Warn : in_handler: w/o "in_value", mismatch in SIR
> Error: 'arm11 target' JTAG communication error SCREG SCAN OUT 0x04
> (expected 0x10)
> Warn : in_handler: w/o "in_value", mismatch in SDR
> Warn : TAP imx35.cpu:
> Warn : value captured during scan didn't pass the requested check:
> Warn : captured: 0x00 check_value: 0x01 check_mask: 0x1F
> Warn : in_handler: w/o "in_value", mismatch in SIR
> Warn : no telnet port specified, using default port 4444
> Warn : no gdb port specified, using default port 3333
> Warn : no tcl port specified, using default port 6666
>

Note 1: Using default openocd (without patch) everything works fine.

Note 2: Although it appear imx35 it is the default imx31 config.

> Best Regards,
>
> Alan
>
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development

Reply via email to