Hi, yes you were right. I gave it a try with sudo. Emitting a reset command via telnet results in:
> reset JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (Manufacturer: 0x23b, Part: 0xba00, Version: 0x3) JTAG Tap/device matched JTAG tap: stm32.bs tap/device found: 0x16410041 (Manufacturer: 0x020, Part: 0x6410, Version: 0x1) JTAG Tap/device matched rlink/rlink.c, 535: too many retries waiting for DTC status Maybe I used the wrong board config? I started with: openocd -f interface/rlink.cfg -f /usr/local/lib/openocd/board/stm32f10x_128k_eval.cfg Is there a special config for the Primer 1? I not yet used with the new config system. _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
