This patch replaces the "very old" syntax with "old" target syntax for the s3c2440.cfg It also adds some more documentation to that same file
I have done some grep actions and it appears that the s3c2440 is the only configuration file that used this syntax.
Index: src/target/target/s3c2440.cfg =================================================================== --- src/target/target/s3c2440.cfg (revision 1110) +++ src/target/target/s3c2440.cfg (working copy) @@ -1,5 +1,16 @@ -# same as OpenMoko? +# Target configuration for the Samsung 2440 system on chip +# Tested on a S3C2440 Evaluation board +# Processor : ARM920Tid(wb) rev 0 (v4l) +# Info: JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0) + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag_device 4 0x1 0xf 0xe + +#target <type> <startup mode> +target arm920t little 0 arm920t + +#reset configuration reset_config trst_and_srst -jtag_device 4 0x1 0xf 0xe -target arm920t little reset_run 0 arm920t + working_area 0 0x200000 0x4000 backup
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
