hello Sir, from the converstion, I realy do not know what to do thank you
On Thu, Oct 4, 2012 at 6:01 AM, Maxim Solodovnik <solomax...@gmail.com>wrote: > My steps: > > apache2 libapache2-mod-proxy-html > > sudo a2enmod proxy && sudo a2enmod proxy_http > > > > On Thu, Oct 4, 2012 at 10:42 AM, George Kirkham <gkirk...@co2crc.com.au>wrote: > >> Maxim,**** >> >> ** ** >> >> Previously I was not able to get this to work, but I believe I needed to >> install “libapache2-mod-proxy-html” as I am using Apache2 which does not >> use the name mod_proxy or mod_html, but I am assuming that they use proxy >> and proxy_html in place of the names you provided. I will experiment with >> this soon. **** >> >> ** ** >> >> I have now run “apt-get install libapache2-mod-proxy-html” to install >> proxy_html**** >> >> ** ** >> >> # a2enmod proxy proxy_html**** >> >> Module proxy already enabled**** >> >> Module proxy_html already enabled**** >> >> # a2enmod headers rewrite**** >> >> Module headers already enabled**** >> >> Module rewrite already enabled**** >> >> ** ** >> >> ** ** >> >> Thanks,**** >> >> ** ** >> >> George Kirkham**** >> >> ** ** >> >> ** ** >> >> ** ** >> >> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com] >> *Sent:* Thursday, 4 October 2012 1:15 PM >> >> *To:* openmeetings-user@incubator.apache.org >> *Subject:* Re: error with moodle plugin**** >> >> ** ** >> >> Actually I do the following (tested on 10+ different machines)**** >> >> ** ** >> >> run OM with all default settings**** >> >> run Apache with mod_proxy+ mod_http installed**** >> >> ** ** >> >> Add section**** >> >> ** ** >> >> <Location /openmeetings>**** >> >> Order allow,deny**** >> >> Allow from all**** >> >> </Location>**** >> >> ** ** >> >> ProxyPass /openmeetings http://localhost:5080/openmeetings**** >> >> ProxyPassReverse /openmeetings http://localhost:5080/openmeetings**** >> >> ** ** >> >> to Apache config (actually I prefer to create separate config >> /etc/apache2/sites-enabled/openmeetings )**** >> >> And that's it**** >> >> ** ** >> >> Additionally I can set up proxying of RTMPT packets, but this requires >> additional config of Apache + modification of config.xml**** >> >> ** ** >> >> ** ** >> >> On Thu, Oct 4, 2012 at 10:08 AM, George Kirkham <gkirkham@co2crc.c >> openmeetings.au <gkirk...@co2crc.com.au>> wrote:**** >> >> Maxim,**** >> >> **** >> >> The page gave this information;**** >> >> Apache config (assumes you are running red5 as non-privileged user >> using default ports): >> >> Set up openmeetings and rtmpt CNAMEs in DNS.that point to Apache proxy >> server. >> >> Add hostname and IP in OS hosts table that point to actual >> openmeetings server on Apache Proxy. >> >> Relevant section of openmeetings virtual host: >> >> <VirtualHost *:80> >> ServerAdmin deve...@mydomain.com >> ServerName openmeetings.mydomain.com >> >> ProxyPass / http://openmeetings.mydomain.com:5080/ >> ProxyPassReverse / http://openmeetings.mydomain.com:5080/ >> ... >> </VirtualHost> >> >> Relevant section of openmeetings-rtmpt virtual host: >> >> <VirtualHost *:80> >> ServerAdmin deve...@mydomain.com >> ServerName rtmpt.mydomain.com >> >> ProxyPass /openmeetings >> http://openmeetings.mydomain.com:5080/openmeetings >> ProxyPassReverse /openmeetings >> http://openmeetings.mydomain.com:5080/openmeetings >> >> ProxyPass / http://openmeetings.mydomain.com:8088/ >> ProxyPassReverse / http://openmeetings.mydomain.com:8088/ >> ... >> </VirtualHost> >> >> OpenMeetings config: >> >> red5/webapps/openmeetings/config.xml: >> >> <rtmphostlocal>rtmpt.mydomain.com</rtmphostlocal> >> >> <rtmpTunnelport>80</rtmpTunnelport> >> >> <red5httpport>80</red5httpport>**** >> >> **** >> >> I do not understand how the configuration can work, as it is telling >> OpenMeetings to use port 80, but is not Apache listening on Port 80 ? I >> did not believe you can have two services listening on the same port number? >> **** >> >> **** >> >> **** >> >> **** >> >> Thanks,**** >> >> **** >> >> George Kirkham**** >> >> **** >> >> **** >> >> **** >> >> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com] >> *Sent:* Thursday, 4 October 2012 1:01 PM >> *To:* openmeetings-user@incubator.apache.org >> *Subject:* Re: error with moodle plugin**** >> >> **** >> >> you need something like this**** >> >> >> https://groups.google.com/forum/?fromgroups=#!topic/openmeetings-user/ZW5tu49sXpA >> **** >> >> **** >> >> **** >> >> On Wed, Oct 3, 2012 at 9:13 PM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> Sir, >> Will you guide me to document about how to configure mod_proxy >> >> Thank you**** >> >> On Wed, Oct 3, 2012 at 5:42 AM, Maxim Solodovnik <solomax...@gmail.com> >> wrote:**** >> >> You have Apache already running on port 80.**** >> >> you need to stop it before running red5 or configure mod_proxy**** >> >> **** >> >> On Wed, Oct 3, 2012 at 9:33 AM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> i just - >> stopped red5 services >> configured the 2 files : $RED5_HOME/conf/red5.properties and >> $RED5_HOME/webapps/openmeetings/config.xml >> restart red5 >> when loging to http://216.224.171.20:80/openmeetings/ >> redirecting to http://216.224.171.20/openmeetings/ >> and 404 error - " Not Found >> The requested URL /openmeetings/ was not found on this server. >> Apache/2.2.16 (Debian) Server at 216.224.171.20 Port 80 >> >> thank you**** >> >> On Wed, Oct 3, 2012 at 4:17 AM, Maxim Solodovnik <solomax...@gmail.com> >> wrote:**** >> >> I mean "*Configure alternative ports*"**** >> >> You need to change RTMPT port from 8088 (current) to 80**** >> >> **** >> >> Or maybe event use apache+mod_proxy to redirect requests from 5080 to 80* >> *** >> >> **** >> >> On Wed, Oct 3, 2012 at 9:06 AM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> Sir, did you mean this part; >> *Preventing Firewall issues* **** >> ------------------------------ >> >> A common way of bypassing the firewall is to change HTTP port to 80 and >> rtmpT to 443. **** >> >> A short description about the connection mechanism: The application first >> tries connecting to rtmp 3 times, because rtmp is the protocol that is less >> performance hungry. If that fails the application will fallback to rtmpT. >> **** >> >> Most firewalls do allow traffic on port 443 and they normally do not >> analyse the packets, because 443 is normally SSL encrypted, so the firewall >> should not be able to read the packets at all.????**** >> >> **** >> >> On Wed, Oct 3, 2012 at 3:57 AM, Maxim Solodovnik <solomax...@gmail.com> >> wrote:**** >> >> I guess you have port issue then**** >> >> try to set up RTMPT on port 80 (please see >> http://incubator.apache.org/openmeetings/PortSettings.html)**** >> >> **** >> >> On Wed, Oct 3, 2012 at 8:51 AM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> Sir, >> in my moodle server i have no access to ssh shell**** >> >> On Wed, Oct 3, 2012 at 3:45 AM, Maxim Solodovnik <solomax...@gmail.com> >> wrote:**** >> >> can you login to your moodle server and try "wget >> http://216.224.171.20:5080/openmeetings/services/UserService?wsdl"?**** >> >> **** >> >> On Wed, Oct 3, 2012 at 8:43 AM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> yes Sir**** >> >> On Wed, Oct 3, 2012 at 3:40 AM, Maxim Solodovnik <solomax...@gmail.com> >> wrote:**** >> >> The URL works as expected now**** >> >> Are you still expecting same moodle issue?**** >> >> **** >> >> On Wed, Oct 3, 2012 at 12:26 AM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> Please Sir, >> You can check now.. >> >> Thank you**** >> >> On Mon, Sep 24, 2012 at 4:08 AM, Maxim Solodovnik <solomax...@gmail.com> >> wrote:**** >> >> http://216.224.171.20:5080/openmeetings/services/UserService?wsdl**** >> >> returns error 404 for me**** >> >> same as http://216.224.171.20:5080/openmeetings/**** >> >> **** >> >> I guess you have changed openmeetings in the URL to something else ....** >> ** >> >> You need to update URL in moodle plugin settings**** >> >> **** >> >> On Mon, Sep 24, 2012 at 7:37 AM, Bakko <asannu...@gmail.com> wrote:**** >> >> The 5080 TCP Port on >> xxx.yyy.171.20<http://xxx.yyy.171.20:5080/openmeetings/services/UserService?wsdl>is >> open? >> **** >> >> El 23/09/2012 19:26, Jean-Marie Landri escribió:**** >> >> Someone Please?**** >> >> On Fri, Sep 14, 2012 at 6:32 AM, Jean-Marie Landri < >> jeanmarielan...@gmail.com> wrote:**** >> >> Hello Sir >> We ping the IP from the server no problem: >> >> PING 216.224.171.20 (216.224.171.20) 56(84) bytes of data. >> 64 bytes from 216.224.171.20: icmp_seq=1 ttl=55 time=28.7 ms >> 64 bytes from 216.224.171.20: icmp_seq=2 ttl=55 time=28.7 ms >> 64 bytes from 216.224.171.20: icmp_seq=3 ttl=55 time=28.7 ms >> 64 bytes from 216.224.171.20: icmp_seq=4 ttl=55 time=28.8 ms >> 64 bytes from 216.224.171.20: icmp_seq=5 ttl=55 time=28.7 ms >> 64 bytes from 216.224.171.20: icmp_seq=6 ttl=55 time=28.7 ms >> ---------------**** >> >> **** >> >> On Sat, Sep 1, 2012 at 2:52 PM, seba.wag...@gmail.com < >> seba.wag...@gmail.com> wrote:**** >> >> You simply cannot connect from your moodle server to openmeetings. >> Try to login to your moodle server via SSH and do: >> "ping 216.224.171.20" >> And watch the output. >> >> Sebastian**** >> >> 2012/8/29 Jean-Marie Landri <jeanmarielan...@gmail.com>**** >> >> >> Hello >> i have installed moodle openmeetings plugin and set up openmeetings >> activity. >> i'm getting error : >> " >> Error >> >> wsdl error: Getting >> http://xxx.yyy.171.20:5080/openmeetings/services/UserService?wsdl - HTTP >> ERROR: cURL ERROR: 28: connect() timed out! >> url: http://216.224.171.20:5080/openmeetings/services/UserService?wsdl >> content_type: >> http_code: 0 >> header_size: 0 >> request_size: 0 >> filetime: -1 >> ssl_verify_result: 0 >> redirect_count: 0 >> total_time: 30.001616 >> namelookup_time: 0.000138 >> connect_time: 0 >> pretransfer_time: 0 >> size_upload: 0 >> size_download: 0 >> speed_download: 0 >> speed_upload: 0 >> download_content_length: -1 >> upload_content_length: -1 >> starttransfer_time: 0 >> redirect_time: 0 >> certinfo: Array >> redirect_url: " >> I tried to uninstall and install it again but the same >> >> thank you**** >> >> >> >> >> -- >> Sebastian Wagner >> https://twitter.com/#!/dead_lock >> http://www.webbase-design.de >> http://www.wagner-sebastian.com >> seba.wag...@gmail.com**** >> >> **** >> >> **** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> WBR >> Maxim aka solomax**** >> >> >> >> **** >> >> ** ** >> >> -- >> WBR >> Maxim aka solomax**** >> > > > > -- > WBR > Maxim aka solomax >
