Sir, did you mean this part; *Preventing Firewall issues* ------------------------------
A common way of bypassing the firewall is to change HTTP port to 80 and rtmpT to 443. A short description about the connection mechanism: The application first tries connecting to rtmp 3 times, because rtmp is the protocol that is less performance hungry. If that fails the application will fallback to rtmpT. Most firewalls do allow traffic on port 443 and they normally do not analyse the packets, because 443 is normally SSL encrypted, so the firewall should not be able to read the packets at all.???? On Wed, Oct 3, 2012 at 3:57 AM, Maxim Solodovnik <solomax...@gmail.com>wrote: > I guess you have port issue then > try to set up RTMPT on port 80 (please see > http://incubator.apache.org/openmeetings/PortSettings.html) > > On Wed, Oct 3, 2012 at 8:51 AM, Jean-Marie Landri < > jeanmarielan...@gmail.com> wrote: > >> Sir, >> in my moodle server i have no access to ssh shell >> >> On Wed, Oct 3, 2012 at 3:45 AM, Maxim Solodovnik <solomax...@gmail.com>wrote: >> >>> can you login to your moodle server and try "wget >>> http://216.224.171.20:5080/openmeetings/services/UserService?wsdl";? >>> >>> >>> On Wed, Oct 3, 2012 at 8:43 AM, Jean-Marie Landri < >>> jeanmarielan...@gmail.com> wrote: >>> >>>> yes Sir >>>> >>>> On Wed, Oct 3, 2012 at 3:40 AM, Maxim Solodovnik >>>> <solomax...@gmail.com>wrote: >>>> >>>>> The URL works as expected now >>>>> Are you still expecting same moodle issue? >>>>> >>>>> >>>>> On Wed, Oct 3, 2012 at 12:26 AM, Jean-Marie Landri < >>>>> jeanmarielan...@gmail.com> wrote: >>>>> >>>>>> Please Sir, >>>>>> You can check now.. >>>>>> >>>>>> Thank you >>>>>> >>>>>> On Mon, Sep 24, 2012 at 4:08 AM, Maxim Solodovnik < >>>>>> solomax...@gmail.com> wrote: >>>>>> >>>>>>> http://216.224.171.20:5080/openmeetings/services/UserService?wsdl >>>>>>> returns error 404 for me >>>>>>> same as http://216.224.171.20:5080/openmeetings/ >>>>>>> >>>>>>> I guess you have changed openmeetings in the URL to something else >>>>>>> .... >>>>>>> You need to update URL in moodle plugin settings >>>>>>> >>>>>>> >>>>>>> On Mon, Sep 24, 2012 at 7:37 AM, Bakko <asannu...@gmail.com> wrote: >>>>>>> >>>>>>>> The 5080 TCP Port on >>>>>>>> xxx.yyy.171.20<http://xxx.yyy.171.20:5080/openmeetings/services/UserService?wsdl>is >>>>>>>> open? >>>>>>>> >>>>>>>> >>>>>>>> El 23/09/2012 19:26, Jean-Marie Landri escribió: >>>>>>>> >>>>>>>> Someone Please? >>>>>>>> >>>>>>>> On Fri, Sep 14, 2012 at 6:32 AM, Jean-Marie Landri < >>>>>>>> jeanmarielan...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Hello Sir >>>>>>>>> We ping the IP from the server no problem: >>>>>>>>> >>>>>>>>> PING 216.224.171.20 (216.224.171.20) 56(84) bytes of data. >>>>>>>>> 64 bytes from 216.224.171.20: icmp_seq=1 ttl=55 time=28.7 ms >>>>>>>>> 64 bytes from 216.224.171.20: icmp_seq=2 ttl=55 time=28.7 ms >>>>>>>>> 64 bytes from 216.224.171.20: icmp_seq=3 ttl=55 time=28.7 ms >>>>>>>>> 64 bytes from 216.224.171.20: icmp_seq=4 ttl=55 time=28.8 ms >>>>>>>>> 64 bytes from 216.224.171.20: icmp_seq=5 ttl=55 time=28.7 ms >>>>>>>>> 64 bytes from 216.224.171.20: icmp_seq=6 ttl=55 time=28.7 ms >>>>>>>>> --------------- >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sat, Sep 1, 2012 at 2:52 PM, seba.wag...@gmail.com < >>>>>>>>> seba.wag...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> You simply cannot connect from your moodle server to openmeetings. >>>>>>>>>> Try to login to your moodle server via SSH and do: >>>>>>>>>> "ping 216.224.171.20" >>>>>>>>>> And watch the output. >>>>>>>>>> >>>>>>>>>> Sebastian >>>>>>>>>> >>>>>>>>>> 2012/8/29 Jean-Marie Landri <jeanmarielan...@gmail.com> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Hello >>>>>>>>>>> i have installed moodle openmeetings plugin and set up >>>>>>>>>>> openmeetings activity. >>>>>>>>>>> i'm getting error : >>>>>>>>>>> " >>>>>>>>>>> Error >>>>>>>>>>> >>>>>>>>>>> wsdl error: Getting >>>>>>>>>>> http://xxx.yyy.171.20:5080/openmeetings/services/UserService?wsdl- >>>>>>>>>>> HTTP ERROR: cURL ERROR: 28: connect() timed out! >>>>>>>>>>> url: >>>>>>>>>>> http://216.224.171.20:5080/openmeetings/services/UserService?wsdl >>>>>>>>>>> content_type: >>>>>>>>>>> http_code: 0 >>>>>>>>>>> header_size: 0 >>>>>>>>>>> request_size: 0 >>>>>>>>>>> filetime: -1 >>>>>>>>>>> ssl_verify_result: 0 >>>>>>>>>>> redirect_count: 0 >>>>>>>>>>> total_time: 30.001616 >>>>>>>>>>> namelookup_time: 0.000138 >>>>>>>>>>> connect_time: 0 >>>>>>>>>>> pretransfer_time: 0 >>>>>>>>>>> size_upload: 0 >>>>>>>>>>> size_download: 0 >>>>>>>>>>> speed_download: 0 >>>>>>>>>>> speed_upload: 0 >>>>>>>>>>> download_content_length: -1 >>>>>>>>>>> upload_content_length: -1 >>>>>>>>>>> starttransfer_time: 0 >>>>>>>>>>> redirect_time: 0 >>>>>>>>>>> certinfo: Array >>>>>>>>>>> redirect_url: " >>>>>>>>>>> I tried to uninstall and install it again but the same >>>>>>>>>>> >>>>>>>>>>> thank you >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Sebastian Wagner >>>>>>>>>> https://twitter.com/#!/dead_lock >>>>>>>>>> http://www.webbase-design.de >>>>>>>>>> http://www.wagner-sebastian.com >>>>>>>>>> seba.wag...@gmail.com >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> WBR >>>>>>> Maxim aka solomax >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> WBR >>>>> Maxim aka solomax >>>>> >>>> >>>> >>> >>> >>> -- >>> WBR >>> Maxim aka solomax >>> >> >> > > > -- > WBR > Maxim aka solomax >
