Hi Folks, After much good advice given on my previous queries, I have decided to purchase an N40L server and migrate to it.
I have a few questions, but first, the set up. *) The BIOS has been flashed to allow AHCI on the fifth SATA channel. It is currently running on a Pico 120w power supply. *) I have only currently fitted the 40Gig SSD system drive, peak is only 30W. *) I am still using the original 2Gig of RAM until I get the system running properly. (8gig is on its way) *) The working installation was updated a few weeks ago so it is a reasonably recent build. Firstly, the old server (still running) had two 40Gig SSDs for the rpool. I have broken the set and am using the second one to try and get the OS running on the N40L in the hope that I can save myself having to re-install and re-configure. However, during boot it start to get a small fraction of red line on the graphical loading bar and then the machine reboots. (I get beyond the installation history list) The previous machine was a 64 bit Intel I3; I knew I might be asking a lot for it to transfer easily to this AMD 64 bit, but nothing ventured nothing gained. Secondly, knowing that there are issues with legacy USB preventing boot, I turned it off on the N40L but then found that after the same rebooting problem continued, I then couldn't get back in to the BIOS to turn legacy boot back on again. (I had to re-set the BIOS settings) So I would like to know what other people have experienced regarding the legacy USB on the N40L, and also if there are any command line settings that I can use (assuming that legacy USB is possible) in order to get the existing installation to work on the N40L please. Many thanks for any help. Michelle. _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
