Greetings.
I've connected a Seagate 3000GB HDD to my OpenIndiana oi_151.1.6 X86
server. But when I try to use it, only 746GB show. Printing the
partition table from format shows:
partition> pri
Current partition table (original):
Total disk cylinders available: 48722 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 48721 746.46GB (48722/0/0) 1565437860
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 15.69MB (1/0/0) 32130
9 unassigned wm 0 0 (0/0/0) 0
format> inq
Vendor: ST3000DM
Product: 001-9YN166
Revision:
Total disk size is 48725 cylinders
Cylinder size is 32130 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Active Solaris 1 48724 48724 100
So, how can I get ZFS to see the full 3TB?
Rainer
--
Mind the Gap
Web: http://www.dragonhearth.com
Blog: http://chaos.dragonhearth.com
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
