After a bit of Googling I found the following.  Hope it helps...

http://www.ibm.com/developerworks/forums/thread.jspa?threadID=362240&tstart=0

"Use of the DS3500 with Solaris MPxIO requires special firmware on the array, 
which your IBM rep can provide to you. Once this was flashed onto the storage 
processors, the VHCI layer was able to coalesce the multiple device paths into 
a single instance. The DS3512 now identifies itself as model 1814 (what is 
that?) instead of 1746."

-Russ


________________________________________
From: Willi Schiegel [[email protected]]
Sent: Thursday, March 29, 2012 1:02 AM
To: Discussion list for OpenIndiana
Subject: Re: [OpenIndiana-discuss] Multipathing help

Did that, but it did not work

root@fs:~# stmsboot -D fp -e
STMS is already enabled. No changes or reboots needed

But I still can see eaxh drive on each path.

....Willi

On 03/28/2012 06:39 PM, Russell Hansen wrote:
> I believe you need to run `stmsboot -u` since you manually updated your 
> fp.conf file.  You could have left fp.conf alone and run `stmsboot -D fp -e` 
> or possibly even `stmsboot -e`.  You should be prompted for a reboot.
>
> -Russ
>
> ________________________________________
> From: Willi Schiegel [[email protected]]
> Sent: Wednesday, March 28, 2012 5:26 AM
> To: [email protected]
> Subject: [OpenIndiana-discuss] Multipathing help
>
> Hi All,
>
> I have oi151a installed on an IBM x3550 M3 server which has two Qlogic 8
> Gb FC HBAs installed. The HBAs are connected to a IBM DS3524 Storage.
> I'm not able to get multipathing working.
>
> I can list the initiator
>
> root@fs:~# mpathadm list initiator-port
> Initiator Port:  iqn.1986-03.com.sun:01:ffffffffffff.4f72fd90,4000002a00ff
> Initiator Port:  21000024ff027a73
> Initiator Port:  21000024ff027a1c
>
> I have
>
> mpxio-disable="no";
>
> in /kernel/drv/fp.conf
>
> and
>
> device-type-scsi-options-list =
> "IBM         1746", "symmetric-option";
>
> symmetric-option = 0x1000000;
>
> in /kernel/drv/scsi_vhci.conf
>
> I still see each drive on each path. What else can I do?
>
> Thank you.
>
> Best,
> Willi
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> [email protected]
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> [email protected]
> http://openindiana.org/mailman/listinfo/openindiana-discuss


_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss

_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss

Reply via email to