Did that, but it did not work

root@fs:~# stmsboot -D fp -e
STMS is already enabled. No changes or reboots needed

But I still can see eaxh drive on each path.

....Willi

On 03/28/2012 06:39 PM, Russell Hansen wrote:
I believe you need to run `stmsboot -u` since you manually updated your fp.conf 
file.  You could have left fp.conf alone and run `stmsboot -D fp -e` or 
possibly even `stmsboot -e`.  You should be prompted for a reboot.

-Russ

________________________________________
From: Willi Schiegel [[email protected]]
Sent: Wednesday, March 28, 2012 5:26 AM
To: [email protected]
Subject: [OpenIndiana-discuss] Multipathing help

Hi All,

I have oi151a installed on an IBM x3550 M3 server which has two Qlogic 8
Gb FC HBAs installed. The HBAs are connected to a IBM DS3524 Storage.
I'm not able to get multipathing working.

I can list the initiator

root@fs:~# mpathadm list initiator-port
Initiator Port:  iqn.1986-03.com.sun:01:ffffffffffff.4f72fd90,4000002a00ff
Initiator Port:  21000024ff027a73
Initiator Port:  21000024ff027a1c

I have

mpxio-disable="no";

in /kernel/drv/fp.conf

and

device-type-scsi-options-list =
"IBM         1746", "symmetric-option";

symmetric-option = 0x1000000;

in /kernel/drv/scsi_vhci.conf

I still see each drive on each path. What else can I do?

Thank you.

Best,
Willi

_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss

_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss


_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss

Reply via email to