Hi, I just had a new server released to me using a SuperMicro SC216A (direct attach backplane) chassis and 3x 9211-8i controllers loaded with 11.0 IT firmware. I've confirmed the firmware is correct, what is strange is that all of the drives are showing as being on one controller (c2) though the LSI BIOS clearly shows the drives scattered across the three controllers:
https://gist.github.com/c9b15104cbaebc640d6d On all other SAS systems I've used with Solaris the target is not the SAS WWN of the drive but a low count integer (e.g. c2t1). Since I don't have physical access to the system, I suspect perhaps the backplane is the SAS expander version and not direct attached. Equally strange is that on the same system, cfgadm -a shows each disk as being on it's own controller (14 of them): https://gist.github.com/6b8094a37acdc341a6af Any insight on what's going would be very appreciated. -J _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
