> You've _got_ cXtYdZ naming - it's just that the (Y) part is > based on the target-port name property, which is generated > from the device devid (closely related to the GUID). > > With your hba, which is using mpt_sas, you have MPxIO on by > default, which is the direction that ON has been heading in > for many years.
Is it possible to turn mpxio off without ruining the rpool? Also, may this help me get around the problem with identifying the drives? > You should be able to see useful information by running > > # cfgadm -lav > > eg, > > Ap_Id Receptacle Occupant Condition Information > When Type Busy Phys_Id > c3 connected configured unknown > unavailable scsi-sas n > /devices/p...@0,0/pci10de,3...@a/pci1000,3...@0:scsi > c3::0,0 connected configured unknown Client Device: > /dev/dsk/c5t5000CCA00510A7CCd0s0(sd37) I tried that, and I got some of the same results. However, the sdXX doesn't mape to the device port, but seem to map to some (to me) random drive. Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
