I'm trying to configure it via NWAM, and it's the mem-full card. When I try to configure it, it just says "waiting for address" in NWAM. I've set it up as manual, and configured it with all of the IP information for the IB network to no avail.
-----Original Message----- From: Albert Lee [mailto:tr...@opensolaris.org] Sent: Saturday, October 16, 2010 9:39 PM To: Discussion list for OpenIndiana Subject: Re: [OpenIndiana-discuss] InfiniBand card not working On Fri, Oct 15, 2010 at 3:25 PM, Matt Breitbach <m...@zfsbuild.com> wrote: > So I've had a real fun time trying to get InfiniBand to work and to be > stable on OpenSolaris, and it appears as though I'm having just as much fun > on OpenIndiana. > > Currently running a Mellanox InfiniHost EX IB card. It shows up in the > network manager, and it shows up on the network from my Subnet Manager, but > when I try to configure it with an IP address, it does nothing. It cannot > ping anything, and an ifconfig -a does not list it at all. > Can you describe how you are trying to configure your device? If it shows up in nwam-manager (the default network GUI), you should configure it the same way as an Ethernet device by selecting the device in nwam-manager, switching to "Manual configuration", and specifying an IPv4 and/or v6 address, rather than trying to bring up the interface by hand. Alternatively, you can disable NWAM using the procedure in nwamd(1) and use the legacy network configuration. Is this the mem-free or mem-full InfiniHost III? These apparently need different drivers. -Albert _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
