First worked as expected: https://jenkins.opendaylight.org/releng/view/openflowplugin/job/openflowplugin-csit-1node-scalability-lithium-redesign-only-beryllium/967/
Second still fails so issue has to be investigated although I do not think it is blocker: cbench: controller benchmarking tool running in mode 'throughput' connecting to controller at 10.29.9.112:6633 faking 8 switches offset 1 :: 10 tests each; 12000 ms per test with 10000 unique source MACs per switch learning destination mac addresses before the test starting test with 0 ms delay after features_reply ignoring first 1 "warmup" and last 0 "cooldown" loops connection delay of 0ms per 1 switch(es) debugging info is off controller msgbuf_read() = 0: closed connection … exiting BR/Luis > On Jul 26, 2016, at 11:30 AM, Luis Gomez <[email protected]> wrote: > > The first is a test error, I fixed it and I re-triggered the job. > > The second I am not sure, I re-triggered to see if this is an sporadic or a > real issue. > > BR/Luis > > >> On Jul 26, 2016, at 10:11 AM, Abhijit Kumbhare <[email protected] >> <mailto:[email protected]>> wrote: >> >> Both are classified as non-critical (as per the test case) - but Luis can >> answer better. First one is a create JVM plot fail (so should not be >> critical) but has a message that will need to be reviewed (including whether >> that particular test should be just rerun): >> >> >> ConnectionError: ConnectionError(('Connection aborted.', error(111, >> 'Connection refused'))) caused by: ProtocolError(('Connection aborted.', >> error(111, 'Connection refused'))) >> >> The second looks harmless I think - as it is just missing the word RESULT >> but does show the results in flows/sec. >> >> '10:16:57.487 8 switches: flows/sec: 85854 92914 81796 0 82911 84662 >> 0 89093 total = 43.102496 per ms ' does not contain 'RESULT' >> >> >> On Tue, Jul 26, 2016 at 9:52 AM, An Ho <[email protected] >> <mailto:[email protected]>> wrote: >> Hi OPENFLOWPLUGIN Team, >> >> There are some distribution test failures in Beryllium SR3 related to your >> project. Could you or someone from your team please take a moment to mark >> these issues in the spreadsheet [1] as "OKAY" to release or "BLOCKING" and >> requires a respin and delay of Beryllium SR3. >> >> https://jenkins.opendaylight.org/releng/job/openflowplugin-csit-1node-scalability-lithium-redesign-only-beryllium/966/ >> >> <https://jenkins.opendaylight.org/releng/job/openflowplugin-csit-1node-scalability-lithium-redesign-only-beryllium/966/> >> https://jenkins.opendaylight.org/releng/job/openflowplugin-csit-1node-cbench-performance-only-beryllium/1616/ >> >> <https://jenkins.opendaylight.org/releng/job/openflowplugin-csit-1node-cbench-performance-only-beryllium/1616/> >> >> Best Regards, >> An Ho >> >> [1] >> https://docs.google.com/spreadsheets/d/1hci5TMUPyB6PX8Al-fwfVqvs5SQVa2wZLja_7rKWN6o/edit#gid=1820514274 >> >> <https://docs.google.com/spreadsheets/d/1hci5TMUPyB6PX8Al-fwfVqvs5SQVa2wZLja_7rKWN6o/edit#gid=1820514274> >> [2] >> https://wiki.opendaylight.org/view/Simultaneous_Release:Beryllium_Release_Plan#Beryllium_SR3_Download >> >> <https://wiki.opendaylight.org/view/Simultaneous_Release:Beryllium_Release_Plan#Beryllium_SR3_Download> >> >> >
_______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
