> -----Original Message-----
> From: openembedded-core@lists.openembedded.org <openembedded-
> c...@lists.openembedded.org> On Behalf Of Rahul Kumar
> Sent: den 23 april 2020 20:40
> To: openembedded-core@lists.openembedded.org
> Cc: Rahul Kumar <rah...@mvista.com>
> Subject: [OE-core] [PATCH v2] bzip2: Add test suite for bzip2
>
> Source: git://sourceware.org/git/bzip2-tests.git
> Type: Enhancement
> Description:
> bzip2 now has a test suite available at git://sourceware.org/git/bzip2-
> tests.git.
>
> This is a collection of "interesting" .bz2 files that can be used to
> test bzip2 works correctly. They come from different projects.
>
> Some files are deliberately bad, and are use to see how bzip2 handles
> corrupt files. They are explicitly not intended to decompress correctly,
> but to catch errors in bzip2 trying to deal with deliberately bad data.
> All such files have a name ending in .bz2.bad.
>
> All non-bad files end in bz2. And should come with a .md5 file for
> the original input file. The .md5 file is used to check that bzip2
> could correctly decompress the file. The original (non-compressed)
> files are deliberately not checked in.
>
> It will by default test with the command 'bzip2', running under
> valgrind (if installed on the system).
>
> For each .bz2 file found it is decompressed, recompressed and
> decompressed again. Once with the default bzip2 settings and
> once in --small (-s) mode.
>
> For each .bz2.bad file decompression is tried twice also. In
> default mode and small mode. The bzip2 binary is expected to
> return either 1 or 2 as exit status. Any other exit code is
> interpreted as failure.
>
> License:
> In bzip2-tests source code Each directory should contain a README
> file explaining where the .bz2 files originally came from.
> Plus a reference to the (Free Software) license that the project
> files were distributed under.
>
> Adding GPLv3+ License to the bzip2 recipe. Since we modify the
> bzip2-tests.git/run-tests.sh script and we can redistribute it and/or
> modify it under the terms of the GNU General Public License (GPL);
> either version 3, or (at your option) any later version.
>
> since all other files and directories are unchanged and We are simply
> using the compressed files as data so we are ignoring the license info for
> these files and directories in bzip2-tests.git
This is not how licenses work. They typically relate to distribution.
I.e., it is the act of distributing the code that is covered in the
license. It does not matter if what is distributed is later used as
source or as a binary blob, it is still being distributed.
Since the code that is covered by, e.g., GPL-3.0 is only distributed in
the ptest package, you will have to set individual package licenses. I.e.,
LICENSE should contain all licenses used by any package. Then for each
package that should have a different license, you need to define it
explicitly. E.g.:
LICENSE_${PN} = "bzip2-1.0.6"
LICENSE_${PN}-dev = "bzip2-1.0.6"
LICENSE_${PN}-dbg = "bzip2-1.0.6"
LICENSE_${PN}-doc = "bzip2-1.0.6"
LICENSE_${PN}-src = "bzip2-1.0.6"
LICENSE_libbz2 = "bzip2-1.0.6"
The above assumes that what is covered by the GPL-3.0 license only ends
up in ${PN}-ptest. If any of it ends up in any of the other packages
above, then obviously they need to be removed from the list too.
//Peter
> Test Summery:
> On qemux86-64/kvm the ptest results with extra filesystem space
> (atleast 114688) are:
>
> TOTAL: 396
> PASS: 396
> SKIP: 0
> XFAIL: 0
> FAIL: 0
> XPASS: 0
> ERROR: 0
>
> All tests passed
> DURATION: 517
>
> [YOCTO #13444]
>
> Signed-off-by: Rahul Kumar <rah...@mvista.com>
> ---
> .../bzip2/0001-bzip2-modify-run-tests-script.patch | 188
> +++++++++++++++++++++
> meta/recipes-extended/bzip2/bzip2/Makefile.am | 2 +
> meta/recipes-extended/bzip2/bzip2_1.0.8.bb | 9 +-
> 3 files changed, 197 insertions(+), 2 deletions(-)
> create mode 100644 meta/recipes-extended/bzip2/bzip2/0001-bzip2-modify-
> run-tests-script.patch
>
> diff --git a/meta/recipes-extended/bzip2/bzip2/0001-bzip2-modify-run-
> tests-script.patch b/meta/recipes-extended/bzip2/bzip2/0001-bzip2-modify-
> run-tests-script.patch
> new file mode 100644
> index 0000000..900a9aa
> --- /dev/null
> +++ b/meta/recipes-extended/bzip2/bzip2/0001-bzip2-modify-run-tests-
> script.patch
> @@ -0,0 +1,188 @@
> +From 8e704bc7bf25f892968eac8bcb40a205248ff5b2 Mon Sep 17 00:00:00 2001
> +From: Rahul Kumar <rah...@mvista.com>
> +Date: Mon, 30 Mar 2020 12:17:00 +0530
> +Subject: [PATCH] bzip2: modify run-tests script
> +
> +1) modify run-tests script to write PASS/FAIL as expected by the ptest
> infrastructure
> +
> +2) Since the discrete md5sum does not have a short form of --status.And
> minimal base
> + images does not support commands with long form arguments so dropping
> this
> + argument
> +
> +Upstream-Status: Submitted [bzip2-de...@sourceware.org]
> +- Submitted to bzip2 mailing list and waiting approval
> +
> +Signed-off-by: Rahul Kumar <rah...@mvista.com>
> +---
> + run-tests.sh | 62 ++++++++++++++++++++++++++++++++---------------------
> -------
> + 1 file changed, 33 insertions(+), 29 deletions(-)
> +
> +diff --git a/run-tests.sh b/run-tests.sh
> +index 1ba8c27..771584d 100755
> +--- a/run-tests.sh
> ++++ b/run-tests.sh
> +@@ -40,21 +40,21 @@ case $i in
> + esac
> + done
> +
> +-if ! type "valgrind" > /dev/null; then
> ++if ! type "valgrind" > /dev/null 2>&1; then
> + VALGRIND=""
> + VALGRIND_ARGS=""
> + fi
> +
> + echo "Testing ${BZIP2} in directory ${TESTS_DIR}"
> + if [ "$VALGRIND" != "" ]; then
> +- echo " using valgrind"
> ++ echo "Using valgrind: Yes"
> + else
> +- echo " NOT using valgrind"
> ++ echo "Using valgrind: No"
> + fi
> + if [[ ${IGNORE_MD5} -eq 0 ]]; then
> +- echo " checking md5 sums"
> ++ echo "Checking md5 sums: Yes"
> + else
> +- echo " NOT checking md5 sums"
> ++ echo "Checking md5 sums: No"
> + fi
> +
> + # Remove any left over tesfilecopies from previous runs first.
> +@@ -78,14 +78,14 @@ while IFS= read -r -d '' bzfile; do
> + # Decompress it.
> + echo " Decompress..."
> + rm -f "${file}"
> +- ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -k -d -q ${bzfile} \
> +- || { echo "!!! bad decompress result $?";
> ++ ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -k -d -q ${bzfile} && { echo
> "PASS: ${bzfile} Decompress"; } \
> ++ || { echo "FAIL: ${bzfile} Decompress";
> + badtests=("${badtests[@]}" $"${bzfile} bad decompress result")
> + nogood=$[${nogood}+1]; continue; }
> +
> + if [[ ${IGNORE_MD5} -ne 1 ]]; then
> +- md5sum --check --status ${md5file} < ${file} \
> +- || { echo "!!! md5sum doesn't match decompressed file";
> ++ md5sum -c ${md5file} < ${file} && { echo "PASS: ${bzfile} md5sum
> Matched"; } \
> ++ || { echo "FAIL: ${bzfile} md5sum Matched";
> + badtests=("${badtests[@]}" $"${file} md5sum doesn't match")
> + nogood=$[${nogood}+1]; continue; }
> + fi
> +@@ -94,19 +94,19 @@ while IFS= read -r -d '' bzfile; do
> + mv "${file}" "${copy}"
> + rm -f "${bzcopy}"
> + echo " Recompress..."
> +- ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -z -q -s ${copy} \
> +- || { echo "!!! bad compress result $?";
> ++ ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -z -q -s ${copy} && { echo
> "PASS: ${bzfile} Recompress "; } \
> ++ || { echo "FAIL: ${bzfile} Recompress";
> + badtests=("${badtests[@]}" $"${copy} bad result")
> + nogood=$[${nogood}+1]; continue; }
> + echo " Redecompress..."
> +- ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -d -q -s ${bzcopy} \
> +- || { echo "!!! bad (re)decompress result $?";
> ++ ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -d -q -s ${bzcopy} && { echo
> "PASS: ${bzfile} Redecompress"; } \
> ++ || { echo "FAIL: ${bzfile} Redecompress";
> + badtests=("${badtests[@]}" $"${bzcopy} bad result")
> + nogood=$[${nogood}+1]; continue; }
> +
> + if [[ ${IGNORE_MD5} -ne 1 ]]; then
> +- md5sum --check --status ${md5file} < ${copy} \
> +- || { echo "!!! md5sum doesn't match (re)decompressed file";
> ++ md5sum -c ${md5file} < ${copy} && { echo "PASS: ${bzfile} md5sum
> Matched"; } \
> ++ || { echo "FAIL: ${bzfile} md5sum Matched";
> + badtests=("${badtests[@]}" $"${copy} md5sum doesn't match")
> + nogood=$[${nogood}+1]; continue; }
> + fi
> +@@ -116,14 +116,14 @@ while IFS= read -r -d '' bzfile; do
> + # Now do it all again in "small" mode.
> + echo " Decompress (small)..."
> + rm -f "${file}"
> +- ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -k -d -q -s ${bzfile} \
> +- || { echo "!!! bad decompress result $?";
> ++ ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -k -d -q -s ${bzfile} &&{ echo
> "PASS: ${bzfile} Decompress (small)"; } \
> ++ || { echo "FAIL: ${bzfile} Decompress (small)";
> + badtests=("${badtests[@]}" $"${bzfile} bad decompress result")
> + nogood=$[${nogood}+1]; continue; }
> +
> + if [[ ${IGNORE_MD5} -ne 1 ]]; then
> +- md5sum --check --status ${md5file} < ${file} \
> +- || { echo "!!! md5sum doesn't match decompressed file";
> ++ md5sum -c ${md5file} < ${file} && { echo "PASS: ${bzfile} Md5sum
> Matched"; } \
> ++ || { echo "FAIL: ${bzfile} Md5sum Matched";
> + badtests=("${badtests[@]}" $"${file} md5sum doesn't match")
> + nogood=$[${nogood}+1]; continue; }
> + fi
> +@@ -132,19 +132,19 @@ while IFS= read -r -d '' bzfile; do
> + mv "${file}" "${copy}"
> + rm -f "${bzcopy}"
> + echo " Recompress (small)..."
> +- ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -z -q -s ${copy} \
> +- || { echo "!!! bad compress result $?";
> ++ ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -z -q -s ${copy} && { echo
> "PASS: ${bzfile} Recompress (small)"; } \
> ++ || { echo "FAIL: ${bzfile} Recompress (small)";
> + badtests=("${badtests[@]}" $"${copy} bad result")
> + nogood=$[${nogood}+1]; continue; }
> + echo " Redecompress (small)..."
> +- ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -d -q -s ${bzcopy} \
> +- || { echo "!!! bad (re)decompress result $?";
> ++ ${VALGRIND} ${VALGRIND_ARGS} ${BZIP2} -d -q -s ${bzcopy} && { echo
> "PASS: ${bzfile} Redecompress (small)"; } \
> ++ || { echo "FAIL: ${bzfile} Redecompress (small)";
> + badtests=("${badtests[@]}" $"${bzcopy} bad result")
> + nogood=$[${nogood}+1]; continue; }
> +
> + if [[ ${IGNORE_MD5} -ne 1 ]]; then
> +- md5sum --check --status ${md5file} < ${copy} \
> +- || { echo "!!! md5sum doesn't match (re)decompressed file";
> ++ md5sum -c ${md5file} < ${copy} && { echo "PASS: ${bzfile} md5sum
> Matched"; } \
> ++ || { echo "FAIL: ${bzfile} md5sum : Miss Matched";
> + badtests=("${badtests[@]}" $"${copy} md5sum doesn't match")
> + nogood=$[${nogood}+1]; continue; }
> + fi
> +@@ -176,7 +176,7 @@ while IFS= read -r -d '' badfile; do
> + ret=$?
> +
> + if [[ ${ret} -eq 0 ]]; then
> +- echo "!!! badness not detected"
> ++ echo "FAIL: badness not detected"
> + nobad=$[${nobad}+1]
> + badtests=("${badtests[@]}" $"${badfile} badness not detected")
> + continue
> +@@ -185,10 +185,12 @@ while IFS= read -r -d '' badfile; do
> + # Assumes "normal" badness is detected by exit code 1 or 2.
> + # A crash or valgrind issue will be reported with something else.
> + if [[ ${ret} != 1 ]] && [[ ${ret} != 2 ]]; then
> +- echo "!!! baddness caused baddness in ${BZIP2}"
> ++ echo "FAIL: baddness caused baddness in ${BZIP2}"
> + badbad=$[${badbad}+1]
> + badtests=("${badtests[@]}" $"${badfile} badness caused baddness")
> + continue
> ++ else
> ++ echo "PASS: Correctly found data integrity errors in ${badfile}
> during decompress."
> + fi
> +
> + echo " Trying to decompress (small)..."
> +@@ -196,7 +198,7 @@ while IFS= read -r -d '' badfile; do
> + ret=$?
> +
> + if [[ ${ret} -eq 0 ]]; then
> +- echo "!!! badness not detected"
> ++ echo "FAIL: badness not detected "
> + nobad=$[${nobad}+1]
> + badtests=("${badtests[@]}" $"${badfile} badness not detected")
> + continue
> +@@ -205,10 +207,12 @@ while IFS= read -r -d '' badfile; do
> + # Assumes "normal" badness is detected by exit code 1 or 2.
> + # A crash or valgrind issue will be reported with something else.
> + if [[ ${ret} != 1 ]] && [[ ${ret} != 2 ]]; then
> +- echo "!!! baddness caused baddness in ${BZIP2}"
> ++ echo "FAIL: baddness caused baddness in ${BZIP2}"
> + badbad=$[${badbad}+1]
> + badtests=("${badtests[@]}" $"${badfile} badness caused baddness")
> + continue
> ++ else
> ++ echo "PASS: Correctly found data integrity errors in ${badfile}
> during decompress (small)"
> + fi
> +
> + done < <(find ${TESTS_DIR} -type f -name \*\.bz2.bad -print0)
> +--
> +2.7.4
> diff --git a/meta/recipes-extended/bzip2/bzip2/Makefile.am
> b/meta/recipes-extended/bzip2/bzip2/Makefile.am
> index dcf6458..aab6558 100644
> --- a/meta/recipes-extended/bzip2/bzip2/Makefile.am
> +++ b/meta/recipes-extended/bzip2/bzip2/Makefile.am
> @@ -46,6 +46,7 @@ runtest:
> else echo "FAIL: sample2 decompress"; fi
> @if cmp sample3.tst sample3.ref; then echo "PASS: sample3
> decompress";\
> else echo "FAIL: sample3 decompress"; fi
> + ./bzip2-tests/run-tests.sh --tests-dir="$(PWD)/bzip2-tests"
>
> install-ptest:
> sed -n '/^runtest:/,/^install-ptest:/{/^install-ptest:/!p}' \
> @@ -56,6 +57,7 @@ install-ptest:
> cp $(srcdir)/sample1.bz2 $(DESTDIR)/
> cp $(srcdir)/sample2.bz2 $(DESTDIR)/
> cp $(srcdir)/sample3.bz2 $(DESTDIR)/
> + cp -rf $(srcdir)/../git $(DESTDIR)/bzip2-
> tests
> ln -s $(bindir)/bzip2 $(DESTDIR)/bzip2
>
> install-exec-hook:
> diff --git a/meta/recipes-extended/bzip2/bzip2_1.0.8.bb b/meta/recipes-
> extended/bzip2/bzip2_1.0.8.bb
> index 8e9b779..983fabd 100644
> --- a/meta/recipes-extended/bzip2/bzip2_1.0.8.bb
> +++ b/meta/recipes-extended/bzip2/bzip2_1.0.8.bb
> @@ -4,17 +4,22 @@ Huffman coding. Compression is generally considerably
> better than that achieved
> LZ77/LZ78-based compressors, and approaches the performance of the PPM
> family of statistical compressors."
> HOMEPAGE = "https://sourceware.org/bzip2/";
> SECTION = "console/utils"
> -LICENSE = "bzip2"
> +LICENSE = "bzip2 & GPLv3+"
> LIC_FILES_CHKSUM =
> "file://LICENSE;beginline=4;endline=37;md5=600af43c50f1fcb82e32f19b32df46
> 64"
>
> SRC_URI = "https://sourceware.org/pub/${BPN}/${BPN}-${PV}.tar.gz \
> + git://sourceware.org/git/bzip2-tests.git;name=bzip2-tests \
> file://configure.ac;subdir=${BP} \
> file://Makefile.am;subdir=${BP} \
> file://run-ptest \
> + file://0001-bzip2-modify-run-tests-
> script.patch;patchdir=${WORKDIR}/git \
> "
> +
> SRC_URI[md5sum] = "67e051268d0c475ea773822f7500d0e5"
> SRC_URI[sha256sum] =
> "ab5a03176ee106d3f0fa90e381da478ddae405918153cca248e682cd0c4a2269"
>
> +SRCREV_bzip2-tests = "8b0198efda1603cf81fa2c7a9bb673dd22ae1661"
> +
> UPSTREAM_CHECK_URI = "https://www.sourceware.org/pub/bzip2/";
>
> PACKAGES =+ "libbz2"
> @@ -39,7 +44,7 @@ do_install_ptest () {
>
> FILES_libbz2 = "${libdir}/lib*${SOLIBS}"
>
> -RDEPENDS_${PN}-ptest += "make"
> +RDEPENDS_${PN}-ptest += "make bash"
>
> PROVIDES_append_class-native = " bzip2-replacement-native"
> BBCLASSEXTEND = "native nativesdk"
> --
> 2.7.4
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#138151):
https://lists.openembedded.org/g/openembedded-core/message/138151
Mute This Topic: https://lists.openembedded.org/mt/73224911/21656
Group Owner: openembedded-core+ow...@lists.openembedded.org
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
