Op 1 jul 2011, om 01:26 heeft Saul Wold het volgende geschreven:
> On 06/28/2011 02:05 AM, Robert Yang wrote:
>> Changes of V4:
>>
>> * Change the definition of GLIBC_DYNAMIC_LINKER as Richard suggested.
>>
>> e.g., the entries in the files that look like:
>> #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
>>
>> become
>>
>> #define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
>>
>> and we define SYSTEMLIBS_DIR in defaults.h.
>>
>> NOTE, the round brackets:
>> #define GLIBC_DYNAMIC_LINKER64 (SYSTEMLIBS_DIR "/ld-linux-x86-64.so.2")
>>
>> doesn't work in in the following define:
>>
>> #define LINUX_DYNAMIC_LINKER \
>> CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
>>
>> so use:
>> #define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
>>
>> * Compare to V3, reduce two patches which are for gcc-crosssdk.inc and
>> gcc-cross-canadian which are not needed any more.
>>
>> * Fix the conflicts(gcc-4.6.0 -> gcc-4.6, and the ${BRANCH})
>>
>> * Both tested 4.5.1 and 4.6:
>> $ bitbake meta-toolchain core-image-sato
>> $ runqemu qemurm
>>
>> Also unpack the sdk to /opt and test to make sure the toolchain works well.
>>
>>
>> The following changes since commit a1f79a7896b6411669b3ccada6204d2695e80fc5:
>>
>> runqueue.py: Add umask task control (2011-06-24 12:23:12 +0100)
>>
>> are available in the git repository at:
>> git://git.pokylinux.org/poky-contrib robert/share_gcc
>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/share_gcc
>>
>> Robert Yang (4):
>> bitbake: share source directory
>> Share gcc work directories
>> gcc-4.5.1: share work directories
>> gcc-4.6: share work directories
>>
>> bitbake/lib/bb/build.py | 4 +-
>> bitbake/lib/bb/cache.py | 3 +
>> bitbake/lib/bb/runqueue.py | 10 +++
>> meta/recipes-devtools/gcc/gcc-4.5.1.inc | 1 +
>> .../gcc-4.5.1/use-defaults.h-and-t-oe-in-B.patch | 57 ++++++++++++++
>> meta/recipes-devtools/gcc/gcc-4.6.inc | 5 +-
>> .../gcc/gcc-4.6/use-defaults.h-and-t-oe-in-B.patch | 80
>> ++++++++++++++++++++
>> meta/recipes-devtools/gcc/gcc-common.inc | 32 +++++++-
>> meta/recipes-devtools/gcc/gcc-configure-common.inc | 48 +++++++-----
>> meta/recipes-devtools/gcc/gcc-configure-cross.inc | 4 +-
>> meta/recipes-devtools/gcc/gcc-crosssdk.inc | 6 --
>> 11 files changed, 218 insertions(+), 32 deletions(-)
>> create mode 100644
>> meta/recipes-devtools/gcc/gcc-4.5.1/use-defaults.h-and-t-oe-in-B.patch
>> create mode 100644
>> meta/recipes-devtools/gcc/gcc-4.6/use-defaults.h-and-t-oe-in-B.patch
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>
>
> Merged into OE-Core
incremental build with rm_work turned on:
ERROR: Function 'do_configure' failed (see
/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r37.0+svnr175127/temp/log.do_configure.27092
for further information)
ERROR: Logfile of failure stored in:
/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r37.0+svnr175127/temp/log.do_configure.27092
Log data follows:
| + cd
/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r37.0+svnr175127/gcc-4.5/build.x86_64-linux.arm-angstrom-linux-gnueabi
| + do_configure
| + sed -i
'/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r37.0+svnr175127/gcc-4_5-branch/gcc/config/*/linux*.h'
-e 's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
| sed: can't read
/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r37.0+svnr175127/gcc-4_5-branch/gcc/config/*/linux*.h:
No such file or directory
| ERROR: Function 'do_configure' failed (see
/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r37.0+svnr175127/temp/log.do_configure.27092
for further information)
NOTE: package gcc-cross-initial-4.5-r37.0+svnr175127: task do_configure: Failed
ERROR: Task 764
(/OE/tentacle/sources/meta-openembedded/meta-oe/recipes-devtools/gcc/gcc-cross-initial_4.5.bb,
do_configure) failed with exit code '1'
Can this patchset get reverted please and reapplied when it actually has been
tested to work?
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
