I typed the command and left out the "y"

SELINUX is turned off, as are iptables.  It seems that the problem at
this time is that the SAN is not returning the data.  I am attempting
to get the SAN guy to make sure this IP and node is allowed to talk to
the SAN.  I just wanted to make sure that the Interface names were not
a problem.

On Nov 29, 7:31 pm, Mike Christie <[email protected]> wrote:
> On 11/29/2011 12:13 PM, Charles DeVoe wrote:
>
> > I have used iscsi successfully on Feodora 14 to connect to the SAN
> > device, I have used it in Fedora 15 VMs to connect to an open-filer
> > device.  I recently installed fedora 16 on a new node and when I run
> > iscsiadm -m discover -t sendtargets -p xx.xx.xx.xx:3260 it is not
>
> Did you cut and paste the command you ran wrong? It should be
>
> iscsiadm -m discovery -t sendtargets -p xx.xx.xx.xx:3260
>
> If you forget the 'y' on discovery then iscsiadm should spit out an error.
>
> > reporting the volumes.   One change is the fedora 16 now calls the
> > interface em1, em2, em3, etc instead of eth0, eth1, etc.  Any
> > suggestions or ideas here
>
> That should not make a difference unless you were using the net
> interfaces names in the iscsi ifaces.
>
> Weird thing is that I think the iscsi tools version in F15 and F16 is
> basically the same. I messed up on the build stuff for F16 so the F15
> version got used. There is an updated version in the fedora 16 testing
> repositories (iscsi-initiator-utils-6.2.0.872-14.fc16).
>
> But so the iscsi tools in F16 should work. I tried them here and it
> worked for me.
>
> Do you see any errors in /var/log/messages? Selinux stuff maybe? Could
> you run the command with debugging on?
>
> iscsiadm -m discovery -t st -p ip:port -d 8
>
> and send all the output.

-- 
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/open-iscsi?hl=en.

Reply via email to