sorry but I do not have lspci installed in this host. What I know is that I
have 2 onboard 1Gb ports and one 2-port 82599em and one 4-port intel 1Gb
NIC.
I have installed zc license for p1p1. The management port is em1.
the ifconfig and ethtool info are listed here:
[root@r510 ~]# ethtool -i p1p1
driver: ixgbe
version: 5.5.3
firmware-version: 0x2b2c0001
expansion-rom-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
[root@r510 ~]# ethtool -i p1p2
driver: ixgbe
version: 5.5.3
firmware-version: 0x2b2c0001
expansion-rom-version:
bus-info: 0000:08:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
[root@r510 ~]# ethtool -i em1
driver: bnx2
version: 2.2.6
firmware-version: 6.0.1 bc 5.2.3 NCSI 2.0.10
expansion-rom-version:
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
[root@r510 ~]# ifconfig
em1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.66.101 netmask 255.255.255.0 broadcast 192.168.66.255
inet6 fe80::2001:70e3:7246:b725 prefixlen 64 scopeid 0x20<link>
ether 84:2b:2b:78:8a:62 txqueuelen 1000 (Ethernet)
RX packets 26069 bytes 3177036 (3.0 MiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 5945 bytes 1443645 (1.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
em2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 84:2b:2b:78:8a:63 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 19 bytes 1737 (1.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19 bytes 1737 (1.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
p1p1: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether 48:f8:db:7e:da:5c txqueuelen 1000 (Ethernet)
RX packets 6322614433 bytes 3091202586919 (2.8 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 869 bytes 147082 (143.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xdd300000-dd380000
p1p2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 48:f8:db:7e:da:5d txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xdd380000-dd400000
p2p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 00:1b:21:b0:5c:a8 txqueuelen 1000 (Ethernet)
RX packets 287 bytes 98154 (95.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xdebc0000-debdffff
p2p2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:1b:21:b0:5c:a9 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xdebe0000-debfffff
p2p3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:1b:21:b0:5c:ac txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xddbc0000-ddbdffff
p2p4: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:1b:21:b0:5c:ad txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xddbe0000-ddbfffff
On Tue, Jan 21, 2020 at 6:08 PM Alfredo Cardigliano <[email protected]>
wrote:
> Hi Wang
> please provide:
>
> 1. lspci | grep Eth
> 2. ifconfig
> 3. ethtool -i {p1p1,p1p2,<management>}
>
> Thank you
> Alfredo
>
> On 21 Jan 2020, at 08:44, Wang <[email protected]> wrote:
>
> hi,
> I have 2 capture interfaces(p1p1 and p1p2, 10Gb) and 1
> management interface in my server. After I have setup the number of rss
> queue of p1p1 with 'pf_ringcfg --configure-driver ixgbe --rss-queues 2',
> I tried to start up two pfcount to do some test: 'pfcount -i zc:p1p1@0'
> and 'pfcount -i zc:p1p1@1'. After the second pfcount started, I lost my
> ssh session with my server and I cannot ping it neither. Everything came
> back after several minutes waiting without doing anything.
> My pfring version is 7.5.0, and Is there anything wrong with it?
>
> thanks,
> wang
> _______________________________________________
> Ntop-misc mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>
>
> _______________________________________________
> Ntop-misc mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
_______________________________________________
Ntop-misc mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop-misc
