Derek how did you update? Via yum? Luca
> On 10 Nov 2016, at 20:11, Spransy, Derek <[email protected]> wrote: > > Hi Alfredo, > > I updated, but now I've run into a different problem. It looks like the new > version of n2disk10g requires glibc 2.14? Was that just changed in this > version? I'm on RHEL 6 and have 2.12: > > $ sudo /usr/local/bin/n2disk10g /etc/n2disk/n2disk-eth5.conf > /usr/local/bin/n2disk10g: /lib64/libc.so.6: version `GLIBC_2.14' not found > (required by /usr/local/bin/n2disk10g) > > Thanks, > Derek > > > From: [email protected] > <[email protected]> on behalf of Alfredo Cardigliano > <[email protected]> > Sent: Thursday, November 10, 2016 1:07 PM > To: [email protected] > Subject: Re: [Ntop-misc] n2disk dumping with RHEL6 Kernel > 2.6.32-642.4.2.el6.x86_64 > > Hi Derek > I tought I updated you on this, but it seems it is not the case, > could you try using -R with latest release? > > Best Regards > Alfredo > >> On 3 Nov 2016, at 18:53, Alfredo Cardigliano <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi Derek >> I need to check if it’s a bug in the n2disk version with -R. Please use it >> without -R in the meantime. >> >> Alfredo >> >>> On 3 Nov 2016, at 18:52, Spransy, Derek <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi Alfredo, >>> >>> Commenting that line out in my config allowed n2disk to run properly. Is >>> that an issue with my config issue or a bug? >>> >>> Thanks, >>> Derek >>> >>> From: [email protected] >>> <mailto:[email protected]> >>> <[email protected] >>> <mailto:[email protected]>> on behalf of Alfredo >>> Cardigliano <[email protected] <mailto:[email protected]>> >>> Sent: Thursday, November 3, 2016 1:48 PM >>> To: [email protected] <mailto:[email protected]> >>> Subject: Re: [Ntop-misc] n2disk dumping with RHEL6 Kernel >>> 2.6.32-642.4.2.el6.x86_64 >>> >>> Derek >>> please try running n2disk without "-R 8,9,10” >>> >>> Alfredo >>> >>>> On 3 Nov 2016, at 18:27, Spransy, Derek <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>> Sure, here's the config: >>>> >>>> -i zc:eth5 >>>> -o /data1/captures >>>> -b 3072 >>>> -p 1024 >>>> -q 1 >>>> -S 0 >>>> -c 6 >>>> -R 8,9,10 >>>> -w 7 >>>> -z 12 >>>> -I >>>> -A /data1/index >>>> --max-num-files 43000 >>>> -P=/var/run/n2disk.pid >>>> --event-log /var/log/n2disk.log >>>> --index-on-compressor-threads >>>> --pcap-compression >>>> --remove-ahead >>>> --unprivileged-user n2disk >>>> --verbose >>>> >>>> And starting verbose: >>>> >>>> $ sudo /usr/local/bin/n2disk10g /etc/n2disk/n2disk-eth5.conf >>>> 03/Nov/2016 13:26:19 [n2disk.c:4808] Welcome to n2disk10g v.2.6.160917 >>>> (r4666) [SandyBridge] >>>> 03/Nov/2016 13:26:19 [n2disk.c:4835] Running on 2 node(s) system with 24 >>>> core(s). NUMA affinity set to node 1. >>>> 03/Nov/2016 13:26:19 [n2disk.c:4864] Using PF_RING for packet capture >>>> 03/Nov/2016 13:26:19 [n2disk.c:4890] WARNING: If you are using standard >>>> drivers (packet capture via kernel) please disable time-pulse thread >>>> 03/Nov/2016 13:26:19 [n2disk.c:4893] Multithread support enabled >>>> 03/Nov/2016 13:26:19 [n2disk.c:5007] Dump files max size is set to 1024 MB >>>> 03/Nov/2016 13:26:19 [n2disk.c:5024] Buffer memory is set to 3 GB (x 3 >>>> pcap files) >>>> 03/Nov/2016 13:26:19 [n2disk.c:5059] Using directory /data1/captures for >>>> dump files >>>> 03/Nov/2016 13:26:19 [n2disk.c:5064] No sub-directories will be created >>>> 03/Nov/2016 13:26:19 [n2disk.c:5069] Up to 43000 files will be written >>>> before overwriting >>>> 03/Nov/2016 13:26:19 [n2disk.c:5079] Dump files max duration is set to 600 >>>> sec >>>> 03/Nov/2016 13:26:19 [n2disk.c:5095] Dumping data in 0.1 MB chunks >>>> 03/Nov/2016 13:26:19 [n2disk.c:5138] Index processing memory is set to 847 >>>> MB (x 3 index files) >>>> 03/Nov/2016 13:26:22 [n2disk.c:5328] Memory allocated successfully >>>> 03/Nov/2016 13:26:22 [n2disk.c:3597] Using time pulse timestamps >>>> 03/Nov/2016 13:26:22 [n2disk.c:3630] Started PF_RING packet reader thread >>>> for device zc:eth5 >>>> $ >>> >>> >>> >>> This e-mail message (including any attachments) is for the sole use of >>> the intended recipient(s) and may contain confidential and privileged >>> information. If the reader of this message is not the intended >>> recipient, you are hereby notified that any dissemination, distribution >>> or copying of this message (including any attachments) is strictly >>> prohibited. >>> >>> If you have received this message in error, please contact >>> the sender by reply e-mail message and destroy all copies of the >>> original message (including attachments). >>> _______________________________________________ >>> Ntop-misc mailing list >>> [email protected] <mailto:[email protected]> >>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc >>> <http://listgateway.unipi.it/mailman/listinfo/ntop-misc> > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
