Hi Alfredo,

I updated, but now I've run into a different problem. It looks like the new 
version of n2disk10g requires glibc 2.14? Was that just changed in this 
version? I'm on RHEL 6 and have 2.12:


$ sudo /usr/local/bin/n2disk10g /etc/n2disk/n2disk-eth5.conf
/usr/local/bin/n2disk10g: /lib64/libc.so.6: version `GLIBC_2.14' not found 
(required by /usr/local/bin/n2disk10g)


Thanks,

Derek


________________________________
From: [email protected] 
<[email protected]> on behalf of Alfredo Cardigliano 
<[email protected]>
Sent: Thursday, November 10, 2016 1:07 PM
To: [email protected]
Subject: Re: [Ntop-misc] n2disk dumping with RHEL6 Kernel 
2.6.32-642.4.2.el6.x86_64

Hi Derek
I tought I updated you on this, but it seems it is not the case,
could you try using -R with latest release?

Best Regards
Alfredo

On 3 Nov 2016, at 18:53, Alfredo Cardigliano 
<[email protected]<mailto:[email protected]>> wrote:

Hi Derek
I need to check if it’s a bug in the n2disk version with -R. Please use it 
without -R in the meantime.

Alfredo

On 3 Nov 2016, at 18:52, Spransy, Derek 
<[email protected]<mailto:[email protected]>> wrote:

Hi Alfredo,

Commenting that line out in my config allowed n2disk to run properly. Is that 
an issue with my config issue or a bug?

Thanks,
Derek

________________________________
From: 
[email protected]<mailto:[email protected]>
 
<[email protected]<mailto:[email protected]>>
 on behalf of Alfredo Cardigliano 
<[email protected]<mailto:[email protected]>>
Sent: Thursday, November 3, 2016 1:48 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [Ntop-misc] n2disk dumping with RHEL6 Kernel 
2.6.32-642.4.2.el6.x86_64

Derek
please try running n2disk without "-R 8,9,10”

Alfredo

On 3 Nov 2016, at 18:27, Spransy, Derek 
<[email protected]<mailto:[email protected]>> wrote:

Sure, here's the config:


-i zc:eth5
-o /data1/captures
-b 3072
-p 1024
-q 1
-S 0
-c 6
-R 8,9,10
-w 7
-z 12
-I
-A /data1/index
--max-num-files 43000
-P=/var/run/n2disk.pid
--event-log /var/log/n2disk.log
--index-on-compressor-threads
--pcap-compression
--remove-ahead
--unprivileged-user n2disk
--verbose


And starting verbose:

$ sudo /usr/local/bin/n2disk10g /etc/n2disk/n2disk-eth5.conf
03/Nov/2016 13:26:19 [n2disk.c:4808] Welcome to n2disk10g v.2.6.160917 (r4666) 
[SandyBridge]
03/Nov/2016 13:26:19 [n2disk.c:4835] Running on 2 node(s) system with 24 
core(s). NUMA affinity set to node 1.
03/Nov/2016 13:26:19 [n2disk.c:4864] Using PF_RING for packet capture
03/Nov/2016 13:26:19 [n2disk.c:4890] WARNING: If you are using standard drivers 
(packet capture via kernel) please disable time-pulse thread
03/Nov/2016 13:26:19 [n2disk.c:4893] Multithread support enabled
03/Nov/2016 13:26:19 [n2disk.c:5007] Dump files max size is set to 1024 MB
03/Nov/2016 13:26:19 [n2disk.c:5024] Buffer memory is set to 3 GB (x 3 pcap 
files)
03/Nov/2016 13:26:19 [n2disk.c:5059] Using directory /data1/captures for dump 
files
03/Nov/2016 13:26:19 [n2disk.c:5064] No sub-directories will be created
03/Nov/2016 13:26:19 [n2disk.c:5069] Up to 43000 files will be written before 
overwriting
03/Nov/2016 13:26:19 [n2disk.c:5079] Dump files max duration is set to 600 sec
03/Nov/2016 13:26:19 [n2disk.c:5095] Dumping data in 0.1 MB chunks
03/Nov/2016 13:26:19 [n2disk.c:5138] Index processing memory is set to 847 MB 
(x 3 index files)
03/Nov/2016 13:26:22 [n2disk.c:5328] Memory allocated successfully
03/Nov/2016 13:26:22 [n2disk.c:3597] Using time pulse timestamps
03/Nov/2016 13:26:22 [n2disk.c:3630] Started PF_RING packet reader thread for 
device zc:eth5
$


________________________________

This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).
_______________________________________________
Ntop-misc mailing list
[email protected]<mailto:[email protected]>
http://listgateway.unipi.it/mailman/listinfo/ntop-misc


_______________________________________________
Ntop-misc mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop-misc

Reply via email to