github-actions[bot] commented on PR #6231: URL: https://github.com/apache/texera/pull/6231#issuecomment-4904400179
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 6 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `40526b8` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28869202381) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 349 | 0.213 | 24,447/86,758/86,758 us | 🔴 +157.7% / 🔴 +464.5% | | 🔴 | bs=100 sw=10 sl=64 | 777 | 0.474 | 124,322/174,882/174,882 us | 🔴 +5.5% / 🔴 +63.6% | | ⚪ | bs=1000 sw=10 sl=64 | 916 | 0.559 | 1,093,822/1,131,725/1,131,725 us | ⚪ within ±5% / 🔴 +11.6% | <details><summary>Baseline details</summary> Latest main `40526b8` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 349 tuples/sec | 402 tuples/sec | 776.68 tuples/sec | -13.2% | -55.1% | | bs=10 sw=10 sl=64 | MB/s | 0.213 MB/s | 0.245 MB/s | 0.474 MB/s | -13.1% | -55.1% | | bs=10 sw=10 sl=64 | p50 | 24,447 us | 23,658 us | 12,599 us | +3.3% | +94.0% | | bs=10 sw=10 sl=64 | p95 | 86,758 us | 33,672 us | 15,370 us | +157.7% | +464.5% | | bs=10 sw=10 sl=64 | p99 | 86,758 us | 33,672 us | 18,723 us | +157.7% | +363.4% | | bs=100 sw=10 sl=64 | throughput | 777 tuples/sec | 806 tuples/sec | 994.07 tuples/sec | -3.6% | -21.8% | | bs=100 sw=10 sl=64 | MB/s | 0.474 MB/s | 0.492 MB/s | 0.607 MB/s | -3.7% | -21.9% | | bs=100 sw=10 sl=64 | p50 | 124,322 us | 122,502 us | 100,754 us | +1.5% | +23.4% | | bs=100 sw=10 sl=64 | p95 | 174,882 us | 165,761 us | 106,898 us | +5.5% | +63.6% | | bs=100 sw=10 sl=64 | p99 | 174,882 us | 165,761 us | 113,210 us | +5.5% | +54.5% | | bs=1000 sw=10 sl=64 | throughput | 916 tuples/sec | 921 tuples/sec | 1,027 tuples/sec | -0.5% | -10.8% | | bs=1000 sw=10 sl=64 | MB/s | 0.559 MB/s | 0.562 MB/s | 0.627 MB/s | -0.5% | -10.8% | | bs=1000 sw=10 sl=64 | p50 | 1,093,822 us | 1,090,830 us | 979,814 us | +0.3% | +11.6% | | bs=1000 sw=10 sl=64 | p95 | 1,131,725 us | 1,133,238 us | 1,019,689 us | -0.1% | +11.0% | | bs=1000 sw=10 sl=64 | p99 | 1,131,725 us | 1,133,238 us | 1,049,906 us | -0.1% | +7.8% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,572.81,200,128000,349,0.213,24446.74,86757.64,86757.64 1,100,10,64,20,2573.70,2000,1280000,777,0.474,124322.15,174882.43,174882.43 2,1000,10,64,20,21832.42,20000,12800000,916,0.559,1093822.40,1131724.99,1131724.99 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
