On Tue, Dec 04, 2007 at 11:02:23AM -0500, Matt Mathis wrote:
> This is probably not an e1000 problem, but a general Ethernet "feature".
> If you defeat auto-negotiation to force the data rate, you implicitly
> defeat duplex negotiation as well. You need to explicitly set the duplex
> mode.
ethtool reports, that I have full duplex line:
ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: Not reported
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
--
Lukáš Hejtmánek
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
