The rcar_canfd driver supports R-Car Gen3 and RZ/G2 SoC's, update the
description to reflect this.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad...@bp.renesas.com>
---
drivers/net/can/rcar/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig
index 6bb0e7c052ad..a669b9ac8057 100644
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
@@ -10,13 +10,13 @@ config CAN_RCAR
be called rcar_can.
config CAN_RCAR_CANFD
- tristate "Renesas R-Car CAN FD controller"
+ tristate "Renesas R-Car Gen3 and RZ/G2 CAN FD controller"
depends on ARCH_RENESAS || ARM
help
Say Y here if you want to use CAN FD controller found on
- Renesas R-Car SoCs. The driver puts the controller in CAN FD only
- mode, which can interoperate with CAN2.0 nodes but does not support
- dedicated CAN 2.0 mode.
+ Renesas R-Car Gen3 and RZ/G2 SoCs. The driver puts the
+ controller in CAN FD only mode, which can interoperate with
+ CAN2.0 nodes but does not support dedicated CAN 2.0 mode.
To compile this driver as a module, choose M here: the module will
be called rcar_canfd.
--
2.17.1
