On Tue, Dec 01, 2020 at 06:06:53PM -0700, David Ahern wrote: > >> > >> With your patch does ping from both hosts work? > > > > Yes, it does. > > > >> What about all of the tests in > >> tools/testing/selftests/net/fcnal-test.sh? specifically curious about > >> the 'LLA to GUA' tests (link local to global). Perhaps those tests need > >> a second interface (e.g., a dummy) that is brought up first to cause the > >> ordering to be different. > > > > The script needs nettest to be in the path... > > > > nettest is in the same directory. Build it and then run the script - > with your patch applied. We need to see if it affects existing tests.
The tests in fcnal-test.sh passed. There are two failures that are expected, I think. Attached is the output. If you agree that my patch is the right solution, I can send the patch out for review. Thanks, Stephen.
########################################################################### IPv4 ping ########################################################################### ################################################################# No VRF SYSCTL: net.ipv4.raw_l3mdev_accept=0 TEST: ping out - ns-B IP [ OK ] TEST: ping out, device bind - ns-B IP [ OK ] TEST: ping out, address bind - ns-B IP [ OK ] TEST: ping out - ns-B loopback IP [ OK ] TEST: ping out, device bind - ns-B loopback IP [ OK ] TEST: ping out, address bind - ns-B loopback IP [ OK ] TEST: ping in - ns-A IP [ OK ] TEST: ping in - ns-A loopback IP [ OK ] TEST: ping local - ns-A IP [ OK ] TEST: ping local - ns-A loopback IP [ OK ] TEST: ping local - loopback [ OK ] TEST: ping local, device bind - ns-A IP [ OK ] TEST: ping local, device bind - ns-A loopback IP [ OK ] TEST: ping local, device bind - loopback [ OK ] TEST: ping out, blocked by rule - ns-B loopback IP [ OK ] TEST: ping in, blocked by rule - ns-A loopback IP [ OK ] TEST: ping out, blocked by route - ns-B loopback IP [ OK ] TEST: ping in, blocked by route - ns-A loopback IP [ OK ] TEST: ping out, unreachable default route - ns-B loopback IP [ OK ] SYSCTL: net.ipv4.raw_l3mdev_accept=1 TEST: ping out - ns-B IP [ OK ] TEST: ping out, device bind - ns-B IP [ OK ] TEST: ping out, address bind - ns-B IP [ OK ] TEST: ping out - ns-B loopback IP [ OK ] TEST: ping out, device bind - ns-B loopback IP [ OK ] TEST: ping out, address bind - ns-B loopback IP [ OK ] TEST: ping in - ns-A IP [ OK ] TEST: ping in - ns-A loopback IP [ OK ] TEST: ping local - ns-A IP [ OK ] TEST: ping local - ns-A loopback IP [ OK ] TEST: ping local - loopback [ OK ] TEST: ping local, device bind - ns-A IP [ OK ] TEST: ping local, device bind - ns-A loopback IP [ OK ] TEST: ping local, device bind - loopback [ OK ] TEST: ping out, blocked by rule - ns-B loopback IP [ OK ] TEST: ping in, blocked by rule - ns-A loopback IP [ OK ] TEST: ping out, blocked by route - ns-B loopback IP [ OK ] TEST: ping in, blocked by route - ns-A loopback IP [ OK ] TEST: ping out, unreachable default route - ns-B loopback IP [ OK ] ################################################################# With VRF SYSCTL: net.ipv4.raw_l3mdev_accept=1 TEST: ping out, VRF bind - ns-B IP [ OK ] TEST: ping out, device bind - ns-B IP [ OK ] TEST: ping out, vrf device + dev address bind - ns-B IP [ OK ] TEST: ping out, vrf device + vrf address bind - ns-B IP [ OK ] TEST: ping out, VRF bind - ns-B loopback IP [ OK ] TEST: ping out, device bind - ns-B loopback IP [ OK ] TEST: ping out, vrf device + dev address bind - ns-B loopback IP [ OK ] TEST: ping out, vrf device + vrf address bind - ns-B loopback IP [ OK ] TEST: ping in - ns-A IP [ OK ] TEST: ping in - VRF IP [ OK ] TEST: ping local, VRF bind - ns-A IP [ OK ] TEST: ping local, VRF bind - VRF IP [ OK ] TEST: ping local, VRF bind - loopback [ OK ] TEST: ping local, device bind - ns-A IP [ OK ] TEST: ping local, device bind - VRF IP [ OK ] TEST: ping local, device bind - loopback [ OK ] TEST: ping out, vrf bind, blocked by rule - ns-B loopback IP [ OK ] TEST: ping out, device bind, blocked by rule - ns-B loopback IP [ OK ] TEST: ping in, blocked by rule - ns-A loopback IP [ OK ] TEST: ping out, vrf bind, unreachable route - ns-B loopback IP [ OK ] TEST: ping out, device bind, unreachable route - ns-B loopback IP [ OK ] TEST: ping in, unreachable route - ns-A loopback IP [ OK ] ########################################################################### IPv4/TCP ########################################################################### ################################################################# No VRF ################################################################# tcp_l3mdev_accept disabled SYSCTL: net.ipv4.tcp_l3mdev_accept=0 TEST: Global server - ns-A IP [ OK ] TEST: Global server - ns-A loopback IP [ OK ] TEST: Device server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: No server - ns-A loopback IP [ OK ] TEST: Client - ns-B IP [ OK ] TEST: Client, device bind - ns-B IP [ OK ] TEST: No server, unbound client - ns-B IP [ OK ] TEST: No server, device client - ns-B IP [ OK ] TEST: Client - ns-B loopback IP [ OK ] TEST: Client, device bind - ns-B loopback IP [ OK ] TEST: No server, unbound client - ns-B loopback IP [ OK ] TEST: No server, device client - ns-B loopback IP [ OK ] TEST: Global server, local connection - ns-A IP [ OK ] TEST: Global server, local connection - ns-A loopback IP [ OK ] TEST: Global server, local connection - loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IP [ OK ] TEST: Device server, unbound client, local connection - ns-A loopback IP [ OK ] TEST: Device server, unbound client, local connection - loopback [ OK ] TEST: Global server, device client, local connection - ns-A IP [ OK ] TEST: Global server, device client, local connection - ns-A loopback IP [ OK ] TEST: Global server, device client, local connection - loopback [ OK ] TEST: Device server, device client, local connection - ns-A IP [ OK ] TEST: No server, device client, local conn - ns-A IP [ OK ] TEST: MD5: Single address config [ OK ] TEST: MD5: Server no config, client uses password [ OK ] TEST: MD5: Client uses wrong password [ OK ] TEST: MD5: Client address does not match address configured with password [ OK ] TEST: MD5: Prefix config [ OK ] TEST: MD5: Prefix config, client uses wrong password [ OK ] TEST: MD5: Prefix config, client address not in configured prefix [ OK ] ################################################################# tcp_l3mdev_accept enabled SYSCTL: net.ipv4.tcp_l3mdev_accept=1 TEST: Global server - ns-A IP [ OK ] TEST: Global server - ns-A loopback IP [ OK ] TEST: Device server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: No server - ns-A loopback IP [ OK ] TEST: Client - ns-B IP [ OK ] TEST: Client, device bind - ns-B IP [ OK ] TEST: No server, unbound client - ns-B IP [ OK ] TEST: No server, device client - ns-B IP [ OK ] TEST: Client - ns-B loopback IP [ OK ] TEST: Client, device bind - ns-B loopback IP [ OK ] TEST: No server, unbound client - ns-B loopback IP [ OK ] TEST: No server, device client - ns-B loopback IP [ OK ] TEST: Global server, local connection - ns-A IP [ OK ] TEST: Global server, local connection - ns-A loopback IP [ OK ] TEST: Global server, local connection - loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IP [ OK ] TEST: Device server, unbound client, local connection - ns-A loopback IP [ OK ] TEST: Device server, unbound client, local connection - loopback [ OK ] TEST: Global server, device client, local connection - ns-A IP [ OK ] TEST: Global server, device client, local connection - ns-A loopback IP [ OK ] TEST: Global server, device client, local connection - loopback [ OK ] TEST: Device server, device client, local connection - ns-A IP [ OK ] TEST: No server, device client, local conn - ns-A IP [ OK ] TEST: MD5: Single address config [ OK ] TEST: MD5: Server no config, client uses password [ OK ] TEST: MD5: Client uses wrong password [ OK ] TEST: MD5: Client address does not match address configured with password [ OK ] TEST: MD5: Prefix config [ OK ] TEST: MD5: Prefix config, client uses wrong password [ OK ] TEST: MD5: Prefix config, client address not in configured prefix [ OK ] ################################################################# With VRF ################################################################# Global server disabled SYSCTL: net.ipv4.tcp_l3mdev_accept=0 TEST: Global server - ns-A IP [ OK ] TEST: VRF server - ns-A IP [ OK ] TEST: Device server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: Global server - VRF IP [ OK ] TEST: VRF server - VRF IP [ OK ] TEST: Device server - VRF IP [ OK ] TEST: No server - VRF IP [ OK ] TEST: Global server, local connection - ns-A IP [ OK ] TEST: MD5: VRF: Single address config [ OK ] TEST: MD5: VRF: Server no config, client uses password [ OK ] TEST: MD5: VRF: Client uses wrong password [ OK ] TEST: MD5: VRF: Client address does not match address configured with password [ OK ] TEST: MD5: VRF: Prefix config [ OK ] TEST: MD5: VRF: Prefix config, client uses wrong password [ OK ] TEST: MD5: VRF: Prefix config, client address not in configured prefix [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in VRF [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in default VRF [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in VRF [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw [ OK ] TEST: MD5: VRF: Device must be a VRF - single address [ OK ] TEST: MD5: VRF: Device must be a VRF - prefix [ OK ] ################################################################# VRF Global server enabled SYSCTL: net.ipv4.tcp_l3mdev_accept=1 TEST: Global server - ns-A IP [ OK ] TEST: VRF server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: Global server - VRF IP [ OK ] TEST: VRF server - VRF IP [ OK ] TEST: No server - VRF IP [ OK ] TEST: Device server - ns-A IP [ OK ] TEST: Global server, local connection - ns-A IP [ OK ] TEST: Global server, local connection - VRF IP [ OK ] TEST: Client, VRF bind - ns-B IP [ OK ] TEST: Client, device bind - ns-B IP [ OK ] TEST: No server, VRF client - ns-B IP [ OK ] TEST: No server, device client - ns-B IP [ OK ] TEST: Client, VRF bind - ns-B loopback IP [ OK ] TEST: Client, device bind - ns-B loopback IP [ OK ] TEST: No server, VRF client - ns-B loopback IP [ OK ] TEST: No server, device client - ns-B loopback IP [ OK ] TEST: VRF server, VRF client, local connection - ns-A IP [ OK ] TEST: VRF server, VRF client, local connection - VRF IP [ OK ] TEST: VRF server, VRF client, local connection - loopback [ OK ] TEST: VRF server, device client, local connection - ns-A IP [ OK ] TEST: VRF server, unbound client, local connection - ns-A IP [ OK ] TEST: Device server, VRF client, local connection - ns-A IP [ OK ] TEST: Device server, device client, local connection - ns-A IP [ OK ] ########################################################################### IPv4/UDP ########################################################################### ################################################################# No VRF ################################################################# udp_l3mdev_accept disabled SYSCTL: net.ipv4.udp_l3mdev_accept=0 TEST: Global server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: Global server - ns-A loopback IP [ OK ] TEST: No server - ns-A loopback IP [ OK ] TEST: Device server - ns-A IP [ OK ] TEST: Client - ns-B IP [ OK ] TEST: Client, device bind - ns-B IP [ OK ] TEST: Client, device send via cmsg - ns-B IP [ OK ] TEST: Client, device bind via IP_UNICAST_IF - ns-B IP [ OK ] TEST: No server, unbound client - ns-B IP [ OK ] TEST: No server, device client - ns-B IP [ OK ] TEST: Client - ns-B loopback IP [ OK ] TEST: Client, device bind - ns-B loopback IP [ OK ] TEST: Client, device send via cmsg - ns-B loopback IP [ OK ] TEST: Client, device bind via IP_UNICAST_IF - ns-B loopback IP [ OK ] TEST: No server, unbound client - ns-B loopback IP [ OK ] TEST: No server, device client - ns-B loopback IP [ OK ] TEST: Global server, local connection - ns-A IP [ OK ] TEST: Global server, local connection - ns-A loopback IP [ OK ] TEST: Global server, local connection - loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IP [ OK ] TEST: Device server, unbound client, local connection - ns-A loopback IP [ OK ] TEST: Device server, unbound client, local connection - loopback [ OK ] TEST: Global server, device client, local connection - ns-A IP [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A IP [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - ns-A IP [ OK ] TEST: Global server, device client, local connection - ns-A loopback IP [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A loopback IP [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - ns-A loopback IP [ OK ] TEST: Global server, device client, local connection - loopback [ OK ] TEST: Global server, device send via cmsg, local connection - loopback [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - loopback [ OK ] TEST: Device server, device client, local conn - ns-A IP [ OK ] TEST: No server, device client, local conn - ns-A IP [ OK ] ################################################################# udp_l3mdev_accept enabled SYSCTL: net.ipv4.udp_l3mdev_accept=1 TEST: Global server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: Global server - ns-A loopback IP [ OK ] TEST: No server - ns-A loopback IP [ OK ] TEST: Device server - ns-A IP [ OK ] TEST: Client - ns-B IP [ OK ] TEST: Client, device bind - ns-B IP [ OK ] TEST: Client, device send via cmsg - ns-B IP [ OK ] TEST: Client, device bind via IP_UNICAST_IF - ns-B IP [ OK ] TEST: No server, unbound client - ns-B IP [ OK ] TEST: No server, device client - ns-B IP [ OK ] TEST: Client - ns-B loopback IP [ OK ] TEST: Client, device bind - ns-B loopback IP [ OK ] TEST: Client, device send via cmsg - ns-B loopback IP [ OK ] TEST: Client, device bind via IP_UNICAST_IF - ns-B loopback IP [ OK ] TEST: No server, unbound client - ns-B loopback IP [ OK ] TEST: No server, device client - ns-B loopback IP [ OK ] TEST: Global server, local connection - ns-A IP [ OK ] TEST: Global server, local connection - ns-A loopback IP [ OK ] TEST: Global server, local connection - loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IP [ OK ] TEST: Device server, unbound client, local connection - ns-A loopback IP [ OK ] TEST: Device server, unbound client, local connection - loopback [ OK ] TEST: Global server, device client, local connection - ns-A IP [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A IP [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - ns-A IP [ OK ] TEST: Global server, device client, local connection - ns-A loopback IP [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A loopback IP [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - ns-A loopback IP [ OK ] TEST: Global server, device client, local connection - loopback [ OK ] TEST: Global server, device send via cmsg, local connection - loopback [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - loopback [ OK ] TEST: Device server, device client, local conn - ns-A IP [ OK ] TEST: No server, device client, local conn - ns-A IP [ OK ] ################################################################# With VRF ################################################################# Global server disabled SYSCTL: net.ipv4.udp_l3mdev_accept=0 TEST: Global server - ns-A IP [ OK ] TEST: VRF server - ns-A IP [ OK ] TEST: Enslaved device server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: Global server, VRF client, local connection - ns-A IP [ OK ] TEST: Global server - VRF IP [ OK ] TEST: VRF server - VRF IP [ OK ] TEST: Enslaved device server - VRF IP [ OK ] TEST: No server - VRF IP [ OK ] TEST: Global server, VRF client, local connection - VRF IP [ OK ] TEST: VRF server, VRF client, local conn - ns-A IP [ OK ] TEST: VRF server, enslaved device client, local connection - ns-A IP [ OK ] TEST: Enslaved device server, VRF client, local conn - ns-A IP [ OK ] TEST: Enslaved device server, device client, local conn - ns-A IP [ OK ] ################################################################# Global server enabled SYSCTL: net.ipv4.udp_l3mdev_accept=1 TEST: Global server - ns-A IP [ OK ] TEST: VRF server - ns-A IP [ OK ] TEST: Enslaved device server - ns-A IP [ OK ] TEST: No server - ns-A IP [ OK ] TEST: Global server - VRF IP [ OK ] TEST: VRF server - VRF IP [ OK ] TEST: Enslaved device server - VRF IP [ OK ] TEST: No server - VRF IP [ OK ] TEST: VRF client [ OK ] TEST: Enslaved device client [ OK ] TEST: No server, VRF client [ OK ] TEST: No server, enslaved device client [ OK ] TEST: Global server, VRF client, local conn - ns-A IP [ OK ] TEST: VRF server, VRF client, local conn - ns-A IP [ OK ] TEST: VRF server, device client, local conn - ns-A IP [ OK ] TEST: Enslaved device server, VRF client, local conn - ns-A IP [ OK ] TEST: Enslaved device server, device client, local conn - ns-A IP [ OK ] TEST: Global server, VRF client, local conn - VRF IP [ OK ] TEST: Global server, VRF client, local conn - loopback [ OK ] TEST: VRF server, VRF client, local conn - VRF IP [ OK ] TEST: VRF server, VRF client, local conn - loopback [ OK ] TEST: No server, VRF client, local conn - ns-A IP [ OK ] TEST: No server, VRF client, local conn - VRF IP [ OK ] TEST: No server, VRF client, local conn - loopback [ OK ] ########################################################################### Run time tests - ipv4 ########################################################################### TEST: Device delete with active traffic - ping in - ns-A IP [ OK ] TEST: Device delete with active traffic - ping in - VRF IP [ OK ] TEST: Device delete with active traffic - ping out - ns-B IP [ OK ] TEST: TCP active socket, global server - ns-A IP [ OK ] TEST: TCP active socket, global server - VRF IP [ OK ] TEST: TCP active socket, VRF server - ns-A IP [ OK ] TEST: TCP active socket, VRF server - VRF IP [ OK ] TEST: TCP active socket, enslaved device server - ns-A IP [ OK ] TEST: TCP active socket, VRF client - ns-A IP [ OK ] TEST: TCP active socket, enslaved device client - ns-A IP [ OK ] TEST: TCP active socket, global server, VRF client, local - ns-A IP [ OK ] TEST: TCP active socket, global server, VRF client, local - VRF IP [ OK ] TEST: TCP active socket, VRF server and client, local - ns-A IP [ OK ] TEST: TCP active socket, VRF server and client, local - VRF IP [ OK ] TEST: TCP active socket, global server, enslaved device client, local - ns-A IP [ OK ] TEST: TCP active socket, VRF server, enslaved device client, local - ns-A IP [ OK ] TEST: TCP active socket, enslaved device server and client, local - ns-A IP [ OK ] TEST: TCP passive socket, global server - ns-A IP [ OK ] TEST: TCP passive socket, global server - VRF IP [ OK ] TEST: TCP passive socket, VRF server - ns-A IP [ OK ] TEST: TCP passive socket, VRF server - VRF IP [ OK ] TEST: TCP passive socket, enslaved device server - ns-A IP [ OK ] TEST: TCP passive socket, VRF client - ns-A IP [ OK ] TEST: TCP passive socket, enslaved device client - ns-A IP [ OK ] TEST: TCP passive socket, global server, VRF client, local - ns-A IP [ OK ] TEST: TCP passive socket, global server, VRF client, local - VRF IP [ OK ] TEST: TCP passive socket, VRF server and client, local - ns-A IP [ OK ] TEST: TCP passive socket, VRF server and client, local - VRF IP [ OK ] TEST: TCP passive socket, global server, enslaved device client, local - ns-A IP [ OK ] TEST: TCP passive socket, VRF server, enslaved device client, local - ns-A IP [ OK ] TEST: TCP passive socket, enslaved device server and client, local - ns-A IP [ OK ] ########################################################################### IPv4 Netfilter ########################################################################### ################################################################# TCP reset TEST: Global server, reject with TCP-reset on Rx - ns-A IP [ OK ] TEST: Global server, reject with TCP-reset on Rx - VRF IP [ OK ] ################################################################# ICMP unreachable TEST: Global TCP server, Rx reject icmp-port-unreach - ns-A IP [ OK ] TEST: Global TCP server, Rx reject icmp-port-unreach - VRF IP [ OK ] TEST: Global UDP server, Rx reject icmp-port-unreach - ns-A IP [ OK ] TEST: Global UDP server, Rx reject icmp-port-unreach - VRF IP [ OK ] ########################################################################### IPv6 ping ########################################################################### ################################################################# No VRF SYSCTL: net.ipv4.raw_l3mdev_accept=0 TEST: ping out - ns-B IPv6 [ OK ] TEST: ping out - ns-B loopback IPv6 [ OK ] TEST: ping out - ns-B IPv6 LLA [ OK ] TEST: ping out - multicast IP [ OK ] TEST: ping out, device bind - ns-B IPv6 [ OK ] TEST: ping out, loopback address bind - ns-B IPv6 [ OK ] TEST: ping out, device bind - ns-B loopback IPv6 [ OK ] TEST: ping out, loopback address bind - ns-B loopback IPv6 [ OK ] TEST: ping in - ns-A IPv6 [ OK ] TEST: ping in - ns-A loopback IPv6 [ OK ] TEST: ping in - ns-A IPv6 LLA [ OK ] TEST: ping in - multicast IP [ OK ] TEST: ping local, no bind - ns-A IPv6 [ OK ] TEST: ping local, no bind - ns-A loopback IPv6 [ OK ] TEST: ping local, no bind - IPv6 loopback [ OK ] TEST: ping local, no bind - ns-A IPv6 LLA [ OK ] TEST: ping local, no bind - multicast IP [ OK ] TEST: ping local, device bind - ns-A IPv6 [ OK ] TEST: ping local, device bind - ns-A IPv6 LLA [ OK ] TEST: ping local, device bind - multicast IP [ OK ] TEST: ping local, device bind - ns-A loopback IPv6 [ OK ] TEST: ping local, device bind - IPv6 loopback [ OK ] TEST: ping out, blocked by rule - ns-B loopback IPv6 [ OK ] TEST: ping out, device bind, blocked by rule - ns-B loopback IPv6 [ OK ] TEST: ping in, blocked by rule - ns-A loopback IPv6 [ OK ] TEST: ping out, blocked by route - ns-B loopback IPv6 [ OK ] TEST: ping out, device bind, blocked by route - ns-B loopback IPv6 [ OK ] TEST: ping in, blocked by route - ns-A loopback IPv6 [ OK ] TEST: ping out, unreachable route - ns-B loopback IPv6 [ OK ] TEST: ping out, device bind, unreachable route - ns-B loopback IPv6 [ OK ] ################################################################# With VRF SYSCTL: net.ipv4.raw_l3mdev_accept=1 TEST: ping out, VRF bind - ns-B IPv6 [ OK ] TEST: ping out, VRF bind - ns-B loopback IPv6 [ OK ] TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL] TEST: ping out, VRF bind - multicast IP [FAIL] TEST: ping out, device bind - ns-B IPv6 [ OK ] TEST: ping out, device bind - ns-B loopback IPv6 [ OK ] TEST: ping out, device bind - ns-B IPv6 LLA [ OK ] TEST: ping out, device bind - multicast IP [ OK ] TEST: ping out, vrf device+address bind - ns-B IPv6 [ OK ] TEST: ping out, vrf device+address bind - ns-B loopback IPv6 [ OK ] TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [ OK ] TEST: ping in - ns-A IPv6 [ OK ] TEST: ping in - VRF IPv6 [ OK ] TEST: ping in - ns-A IPv6 LLA [ OK ] TEST: ping in - multicast IP [ OK ] TEST: ping in - ns-A loopback IPv6 [ OK ] TEST: ping local, VRF bind - ns-A IPv6 [ OK ] TEST: ping local, VRF bind - VRF IPv6 [ OK ] TEST: ping local, VRF bind - IPv6 loopback [ OK ] TEST: ping local, device bind - ns-A IPv6 [ OK ] TEST: ping local, device bind - ns-A IPv6 LLA [ OK ] TEST: ping local, device bind - multicast IP [ OK ] TEST: ping in, LLA to GUA - ns-A IPv6 [ OK ] TEST: ping in, LLA to GUA - VRF IPv6 [ OK ] TEST: ping out, blocked by rule - ns-B loopback IPv6 [ OK ] TEST: ping out, device bind, blocked by rule - ns-B loopback IPv6 [ OK ] TEST: ping in, blocked by rule - ns-A loopback IPv6 [ OK ] TEST: ping out, unreachable route - ns-B loopback IPv6 [ OK ] TEST: ping out, device bind, unreachable route - ns-B loopback IPv6 [ OK ] TEST: ping in, unreachable route - ns-A loopback IPv6 [ OK ] ########################################################################### IPv6/TCP ########################################################################### ################################################################# No VRF ################################################################# tcp_l3mdev_accept disabled SYSCTL: net.ipv4.tcp_l3mdev_accept=0 TEST: Global server - ns-A IPv6 [ OK ] TEST: Global server - ns-A loopback IPv6 [ OK ] TEST: Global server - ns-A IPv6 LLA [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - ns-A loopback IPv6 [ OK ] TEST: No server - ns-A IPv6 LLA [ OK ] TEST: Client - ns-B IPv6 [ OK ] TEST: Client - ns-B loopback IPv6 [ OK ] TEST: Client - ns-B IPv6 LLA [ OK ] TEST: Client, device bind - ns-B IPv6 [ OK ] TEST: Client, device bind - ns-B loopback IPv6 [ OK ] TEST: Client, device bind - ns-B IPv6 LLA [ OK ] TEST: No server, device client - ns-B IPv6 [ OK ] TEST: No server, device client - ns-B loopback IPv6 [ OK ] TEST: No server, device client - ns-B IPv6 LLA [ OK ] TEST: Global server, local connection - ns-A IPv6 [ OK ] TEST: Global server, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, local connection - IPv6 loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IPv6 [ OK ] TEST: Device server, unbound client, local connection - ns-A loopback IPv6 [ OK ] TEST: Device server, unbound client, local connection - IPv6 loopback [ OK ] TEST: Global server, device client, local connection - ns-A IPv6 [ OK ] TEST: Global server, device client, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device client, local connection - IPv6 loopback [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 LLA [ OK ] TEST: No server, device client, local conn - ns-A IPv6 [ OK ] TEST: No server, device client, local conn - ns-A IPv6 LLA [ OK ] TEST: MD5: Single address config [ OK ] TEST: MD5: Server no config, client uses password [ OK ] TEST: MD5: Client uses wrong password [ OK ] TEST: MD5: Client address does not match address configured with password [ OK ] TEST: MD5: Prefix config [ OK ] TEST: MD5: Prefix config, client uses wrong password [ OK ] TEST: MD5: Prefix config, client address not in configured prefix [ OK ] ################################################################# tcp_l3mdev_accept enabled SYSCTL: net.ipv4.tcp_l3mdev_accept=1 TEST: Global server - ns-A IPv6 [ OK ] TEST: Global server - ns-A loopback IPv6 [ OK ] TEST: Global server - ns-A IPv6 LLA [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - ns-A loopback IPv6 [ OK ] TEST: No server - ns-A IPv6 LLA [ OK ] TEST: Client - ns-B IPv6 [ OK ] TEST: Client - ns-B loopback IPv6 [ OK ] TEST: Client - ns-B IPv6 LLA [ OK ] TEST: Client, device bind - ns-B IPv6 [ OK ] TEST: Client, device bind - ns-B loopback IPv6 [ OK ] TEST: Client, device bind - ns-B IPv6 LLA [ OK ] TEST: No server, device client - ns-B IPv6 [ OK ] TEST: No server, device client - ns-B loopback IPv6 [ OK ] TEST: No server, device client - ns-B IPv6 LLA [ OK ] TEST: Global server, local connection - ns-A IPv6 [ OK ] TEST: Global server, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, local connection - IPv6 loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IPv6 [ OK ] TEST: Device server, unbound client, local connection - ns-A loopback IPv6 [ OK ] TEST: Device server, unbound client, local connection - IPv6 loopback [ OK ] TEST: Global server, device client, local connection - ns-A IPv6 [ OK ] TEST: Global server, device client, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device client, local connection - IPv6 loopback [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 LLA [ OK ] TEST: No server, device client, local conn - ns-A IPv6 [ OK ] TEST: No server, device client, local conn - ns-A IPv6 LLA [ OK ] TEST: MD5: Single address config [ OK ] TEST: MD5: Server no config, client uses password [ OK ] TEST: MD5: Client uses wrong password [ OK ] TEST: MD5: Client address does not match address configured with password [ OK ] TEST: MD5: Prefix config [ OK ] TEST: MD5: Prefix config, client uses wrong password [ OK ] TEST: MD5: Prefix config, client address not in configured prefix [ OK ] ################################################################# With VRF ################################################################# Global server disabled SYSCTL: net.ipv4.tcp_l3mdev_accept=0 TEST: Global server - ns-A IPv6 [ OK ] TEST: Global server - VRF IPv6 [ OK ] TEST: Global server - ns-A IPv6 LLA [ OK ] TEST: VRF server - ns-A IPv6 [ OK ] TEST: VRF server - VRF IPv6 [ OK ] TEST: VRF server - ns-A IPv6 LLA [ OK ] TEST: Device server - ns-A IPv6 [ OK ] TEST: Device server - VRF IPv6 [ OK ] TEST: Device server - ns-A IPv6 LLA [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - VRF IPv6 [ OK ] TEST: No server - ns-A IPv6 LLA [ OK ] TEST: Global server, local connection - ns-A IPv6 [ OK ] TEST: MD5: VRF: Single address config [ OK ] TEST: MD5: VRF: Server no config, client uses password [ OK ] TEST: MD5: VRF: Client uses wrong password [ OK ] TEST: MD5: VRF: Client address does not match address configured with password [ OK ] TEST: MD5: VRF: Prefix config [ OK ] TEST: MD5: VRF: Prefix config, client uses wrong password [ OK ] TEST: MD5: VRF: Prefix config, client address not in configured prefix [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in VRF [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in default VRF [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw [ OK ] TEST: MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in VRF [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw [ OK ] TEST: MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw [ OK ] TEST: MD5: VRF: Device must be a VRF - single address [ OK ] TEST: MD5: VRF: Device must be a VRF - prefix [ OK ] ################################################################# VRF Global server enabled SYSCTL: net.ipv4.tcp_l3mdev_accept=1 TEST: Global server - ns-A IPv6 [ OK ] TEST: Global server - VRF IPv6 [ OK ] TEST: VRF server - ns-A IPv6 [ OK ] TEST: VRF server - VRF IPv6 [ OK ] TEST: Global server - ns-A IPv6 LLA [ OK ] TEST: VRF server - ns-A IPv6 LLA [ OK ] TEST: Device server - ns-A IPv6 [ OK ] TEST: Device server - ns-A IPv6 LLA [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - VRF IPv6 [ OK ] TEST: No server - ns-A IPv6 LLA [ OK ] TEST: Global server, local connection - ns-A IPv6 [ OK ] TEST: Global server, local connection - VRF IPv6 [ OK ] TEST: Client, VRF bind - ns-B IPv6 [ OK ] TEST: Client, VRF bind - ns-B loopback IPv6 [ OK ] TEST: Client, VRF bind - ns-B IPv6 LLA [ OK ] TEST: Client, device bind - ns-B IPv6 [ OK ] TEST: Client, device bind - ns-B loopback IPv6 [ OK ] TEST: Client, device bind - ns-B IPv6 LLA [ OK ] TEST: No server, VRF client - ns-B IPv6 [ OK ] TEST: No server, VRF client - ns-B loopback IPv6 [ OK ] TEST: No server, device client - ns-B IPv6 [ OK ] TEST: No server, device client - ns-B loopback IPv6 [ OK ] TEST: No server, device client - ns-B IPv6 LLA [ OK ] TEST: VRF server, VRF client, local connection - ns-A IPv6 [ OK ] TEST: VRF server, VRF client, local connection - VRF IPv6 [ OK ] TEST: VRF server, VRF client, local connection - IPv6 loopback [ OK ] TEST: VRF server, device client, local connection - ns-A IPv6 [ OK ] TEST: VRF server, unbound client, local connection - ns-A IPv6 [ OK ] TEST: Device server, VRF client, local connection - ns-A IPv6 [ OK ] TEST: Device server, device client, local connection - ns-A IPv6 [ OK ] TEST: Device server, device client, local connection - ns-A IPv6 LLA [ OK ] SYSCTL: net.ipv4.udp_early_demux=1 ########################################################################### IPv6/UDP ########################################################################### ################################################################# No VRF ################################################################# udp_l3mdev_accept disabled SYSCTL: net.ipv4.udp_l3mdev_accept=0 TEST: Global server - ns-A IPv6 [ OK ] TEST: Device server - ns-A IPv6 [ OK ] TEST: Global server - ns-A IPv6 LLA [ OK ] TEST: Device server - ns-A IPv6 LLA [ OK ] TEST: Global server - ns-A loopback IPv6 [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - ns-A loopback IPv6 [ OK ] TEST: No server - ns-A IPv6 LLA [ OK ] TEST: Client - ns-B IPv6 [ OK ] TEST: Client, device bind - ns-B IPv6 [ OK ] TEST: Client, device send via cmsg - ns-B IPv6 [ OK ] TEST: Client, device bind via IPV6_UNICAST_IF - ns-B IPv6 [ OK ] TEST: No server, unbound client - ns-B IPv6 [ OK ] TEST: No server, device client - ns-B IPv6 [ OK ] TEST: Client - ns-B loopback IPv6 [ OK ] TEST: Client, device bind - ns-B loopback IPv6 [ OK ] TEST: Client, device send via cmsg - ns-B loopback IPv6 [ OK ] TEST: Client, device bind via IPV6_UNICAST_IF - ns-B loopback IPv6 [ OK ] TEST: No server, unbound client - ns-B loopback IPv6 [ OK ] TEST: No server, device client - ns-B loopback IPv6 [ OK ] TEST: Client - ns-B IPv6 LLA [ OK ] TEST: Client, device bind - ns-B IPv6 LLA [ OK ] TEST: Client, device send via cmsg - ns-B IPv6 LLA [ OK ] TEST: Client, device bind via IPV6_UNICAST_IF - ns-B IPv6 LLA [ OK ] TEST: No server, unbound client - ns-B IPv6 LLA [ OK ] TEST: No server, device client - ns-B IPv6 LLA [ OK ] TEST: Global server, local connection - ns-A IPv6 [ OK ] TEST: Global server, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, local connection - IPv6 loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IPv6 [ OK ] TEST: Device server, local connection - ns-A loopback IPv6 [ OK ] TEST: Device server, local connection - IPv6 loopback [ OK ] TEST: Global server, device client, local connection - ns-A IPv6 [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A IPv6 [ OK ] TEST: Global server, device client via IPV6_UNICAST_IF, local connection - ns-A IPv6 [ OK ] TEST: Global server, device client, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device client, local connection - IPv6 loopback [ OK ] TEST: Global server, device send via cmsg, local connection - IPv6 loopback [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - IPv6 loopback [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 [ OK ] TEST: No server, device client, local conn - ns-A IPv6 [ OK ] TEST: UDP in - LLA to GUA [ OK ] ################################################################# udp_l3mdev_accept enabled SYSCTL: net.ipv4.udp_l3mdev_accept=1 TEST: Global server - ns-A IPv6 [ OK ] TEST: Device server - ns-A IPv6 [ OK ] TEST: Global server - ns-A IPv6 LLA [ OK ] TEST: Device server - ns-A IPv6 LLA [ OK ] TEST: Global server - ns-A loopback IPv6 [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - ns-A loopback IPv6 [ OK ] TEST: No server - ns-A IPv6 LLA [ OK ] TEST: Client - ns-B IPv6 [ OK ] TEST: Client, device bind - ns-B IPv6 [ OK ] TEST: Client, device send via cmsg - ns-B IPv6 [ OK ] TEST: Client, device bind via IPV6_UNICAST_IF - ns-B IPv6 [ OK ] TEST: No server, unbound client - ns-B IPv6 [ OK ] TEST: No server, device client - ns-B IPv6 [ OK ] TEST: Client - ns-B loopback IPv6 [ OK ] TEST: Client, device bind - ns-B loopback IPv6 [ OK ] TEST: Client, device send via cmsg - ns-B loopback IPv6 [ OK ] TEST: Client, device bind via IPV6_UNICAST_IF - ns-B loopback IPv6 [ OK ] TEST: No server, unbound client - ns-B loopback IPv6 [ OK ] TEST: No server, device client - ns-B loopback IPv6 [ OK ] TEST: Client - ns-B IPv6 LLA [ OK ] TEST: Client, device bind - ns-B IPv6 LLA [ OK ] TEST: Client, device send via cmsg - ns-B IPv6 LLA [ OK ] TEST: Client, device bind via IPV6_UNICAST_IF - ns-B IPv6 LLA [ OK ] TEST: No server, unbound client - ns-B IPv6 LLA [ OK ] TEST: No server, device client - ns-B IPv6 LLA [ OK ] TEST: Global server, local connection - ns-A IPv6 [ OK ] TEST: Global server, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, local connection - IPv6 loopback [ OK ] TEST: Device server, unbound client, local connection - ns-A IPv6 [ OK ] TEST: Device server, local connection - ns-A loopback IPv6 [ OK ] TEST: Device server, local connection - IPv6 loopback [ OK ] TEST: Global server, device client, local connection - ns-A IPv6 [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A IPv6 [ OK ] TEST: Global server, device client via IPV6_UNICAST_IF, local connection - ns-A IPv6 [ OK ] TEST: Global server, device client, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device send via cmsg, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - ns-A loopback IPv6 [ OK ] TEST: Global server, device client, local connection - IPv6 loopback [ OK ] TEST: Global server, device send via cmsg, local connection - IPv6 loopback [ OK ] TEST: Global server, device client via IP_UNICAST_IF, local connection - IPv6 loopback [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 [ OK ] TEST: No server, device client, local conn - ns-A IPv6 [ OK ] TEST: UDP in - LLA to GUA [ OK ] ################################################################# With VRF ################################################################# Global server disabled SYSCTL: net.ipv4.udp_l3mdev_accept=0 TEST: Global server - ns-A IPv6 [ OK ] TEST: Global server - VRF IPv6 [ OK ] TEST: VRF server - ns-A IPv6 [ OK ] TEST: VRF server - VRF IPv6 [ OK ] TEST: Enslaved device server - ns-A IPv6 [ OK ] TEST: Enslaved device server - VRF IPv6 [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - VRF IPv6 [ OK ] TEST: Global server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: Global server, VRF client, local conn - VRF IPv6 [ OK ] TEST: VRF server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: VRF server, VRF client, local conn - VRF IPv6 [ OK ] TEST: Global server, device client, local conn - ns-A IPv6 [ OK ] TEST: VRF server, device client, local conn - ns-A IPv6 [ OK ] TEST: Enslaved device server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: Enslaved device server, device client, local conn - ns-A IPv6 [ OK ] ################################################################# Global server enabled SYSCTL: net.ipv4.udp_l3mdev_accept=1 TEST: Global server - ns-A IPv6 [ OK ] TEST: Global server - VRF IPv6 [ OK ] TEST: VRF server - ns-A IPv6 [ OK ] TEST: VRF server - VRF IPv6 [ OK ] TEST: Enslaved device server - ns-A IPv6 [ OK ] TEST: Enslaved device server - VRF IPv6 [ OK ] TEST: No server - ns-A IPv6 [ OK ] TEST: No server - VRF IPv6 [ OK ] TEST: VRF client [ OK ] TEST: No server, VRF client [ OK ] TEST: Enslaved device client [ OK ] TEST: No server, enslaved device client [ OK ] TEST: Global server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: VRF server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: Global server, VRF client, local conn - VRF IPv6 [ OK ] TEST: VRF server, VRF client, local conn - VRF IPv6 [ OK ] TEST: No server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: No server, VRF client, local conn - VRF IPv6 [ OK ] TEST: Global server, device client, local conn - ns-A IPv6 [ OK ] TEST: VRF server, device client, local conn - ns-A IPv6 [ OK ] TEST: Device server, VRF client, local conn - ns-A IPv6 [ OK ] TEST: Device server, device client, local conn - ns-A IPv6 [ OK ] TEST: No server, device client, local conn - ns-A IPv6 [ OK ] TEST: Global server, linklocal IP [ OK ] TEST: No server, linklocal IP [ OK ] TEST: Enslaved device client, linklocal IP [ OK ] TEST: No server, device client, peer linklocal IP [ OK ] TEST: Enslaved device client, local conn - linklocal IP [ OK ] TEST: No server, device client, local conn - linklocal IP [ OK ] TEST: UDP in - LLA to GUA [ OK ] ########################################################################### Run time tests - ipv6 ########################################################################### TEST: Device delete with active traffic - ping in - ns-A IPv6 [ OK ] TEST: Device delete with active traffic - ping out - ns-A IPv6 [ OK ] TEST: TCP active socket, global server - ns-A IPv6 [ OK ] TEST: TCP active socket, global server - VRF IPv6 [ OK ] TEST: TCP active socket, VRF server - ns-A IPv6 [ OK ] TEST: TCP active socket, VRF server - VRF IPv6 [ OK ] TEST: TCP active socket, enslaved device server - ns-A IPv6 [ OK ] TEST: TCP active socket, enslaved device server - VRF IPv6 [ OK ] TEST: TCP active socket, VRF client [ OK ] TEST: TCP active socket, enslaved device client [ OK ] TEST: TCP active socket, global server, VRF client - ns-A IPv6 [ OK ] TEST: TCP active socket, global server, VRF client - VRF IPv6 [ OK ] TEST: TCP active socket, VRF server and client - ns-A IPv6 [ OK ] TEST: TCP active socket, VRF server and client - VRF IPv6 [ OK ] TEST: TCP active socket, global server, device client - ns-A IPv6 [ OK ] TEST: TCP active socket, VRF server, device client - ns-A IPv6 [ OK ] TEST: TCP active socket, device server, device client - ns-A IPv6 [ OK ] TEST: TCP passive socket, global server - ns-A IPv6 [ OK ] TEST: TCP passive socket, global server - VRF IPv6 [ OK ] TEST: TCP passive socket, VRF server - ns-A IPv6 [ OK ] TEST: TCP passive socket, VRF server - VRF IPv6 [ OK ] TEST: TCP passive socket, enslaved device server - ns-A IPv6 [ OK ] TEST: TCP passive socket, enslaved device server - VRF IPv6 [ OK ] TEST: TCP passive socket, VRF client [ OK ] TEST: TCP passive socket, enslaved device client [ OK ] TEST: TCP passive socket, global server, VRF client - ns-A IPv6 [ OK ] TEST: TCP passive socket, global server, VRF client - VRF IPv6 [ OK ] TEST: TCP passive socket, VRF server and client - ns-A IPv6 [ OK ] TEST: TCP passive socket, VRF server and client - VRF IPv6 [ OK ] TEST: TCP passive socket, global server, device client - ns-A IPv6 [ OK ] TEST: TCP passive socket, VRF server, device client - ns-A IPv6 [ OK ] TEST: TCP passive socket, device server, device client - ns-A IPv6 [ OK ] TEST: UDP active socket, global server - ns-A IPv6 [ OK ] TEST: UDP active socket, global server - VRF IPv6 [ OK ] TEST: UDP active socket, VRF server - ns-A IPv6 [ OK ] TEST: UDP active socket, VRF server - VRF IPv6 [ OK ] TEST: UDP active socket, enslaved device server - ns-A IPv6 [ OK ] TEST: UDP active socket, enslaved device server - VRF IPv6 [ OK ] TEST: UDP active socket, VRF client [ OK ] TEST: UDP active socket, enslaved device client [ OK ] TEST: UDP active socket, global server, VRF client - ns-A IPv6 [ OK ] TEST: UDP active socket, global server, VRF client - VRF IPv6 [ OK ] TEST: UDP active socket, VRF server and client - ns-A IPv6 [ OK ] TEST: UDP active socket, VRF server and client - VRF IPv6 [ OK ] TEST: UDP active socket, global server, device client - ns-A IPv6 [ OK ] TEST: UDP active socket, VRF server, device client - ns-A IPv6 [ OK ] TEST: UDP active socket, device server, device client - ns-A IPv6 [ OK ] ########################################################################### IPv6 Netfilter ########################################################################### ################################################################# TCP reset TEST: Global server, reject with TCP-reset on Rx - ns-A IPv6 [ OK ] TEST: Global server, reject with TCP-reset on Rx - VRF IPv6 [ OK ] ################################################################# ICMP unreachable TEST: Global TCP server, Rx reject icmp-port-unreach - ns-A IPv6 [ OK ] TEST: Global TCP server, Rx reject icmp-port-unreach - VRF IPv6 [ OK ] TEST: Global UDP server, Rx reject icmp-port-unreach - ns-A IPv6 [ OK ] TEST: Global UDP server, Rx reject icmp-port-unreach - VRF IPv6 [ OK ] ########################################################################### Use cases ########################################################################### TEST: Bridge into VRF - IPv4 ping out [ OK ] TEST: Bridge into VRF - IPv6 ping out [ OK ] TEST: Bridge into VRF - IPv4 ping in [ OK ] TEST: Bridge into VRF - IPv6 ping in [ OK ] TEST: Bridge into VRF with br_netfilter - IPv4 ping out [ OK ] TEST: Bridge into VRF with br_netfilter - IPv6 ping out [ OK ] TEST: Bridge into VRF with br_netfilter - IPv4 ping in [ OK ] TEST: Bridge into VRF with br_netfilter - IPv6 ping in [ OK ] TEST: Bridge vlan into VRF - IPv4 ping out [ OK ] TEST: Bridge vlan into VRF - IPv6 ping out [ OK ] TEST: Bridge vlan into VRF - IPv4 ping in [ OK ] TEST: Bridge vlan into VRF - IPv6 ping in [ OK ] TEST: Bridge vlan into VRF with br_netfilter - IPv4 ping out [ OK ] TEST: Bridge vlan into VRF with br_netfilter - IPv6 ping out [ OK ] TEST: Bridge vlan into VRF - IPv4 ping in [ OK ] TEST: Bridge vlan into VRF - IPv6 ping in [ OK ] Tests passed: 708 Tests failed: 2
