On Wed, 4 Nov 2020 14:14:24 +0200
Vladimir Oltean <olte...@gmail.com> wrote:
> On Wed, Nov 04, 2020 at 12:10:53PM +0100, Marek Behún wrote:
> > > I'm not sure it's worth the change :(
> > > Let's put it another way, your diffstat has 338 insertions and 335
> > > deletions. Aka you're saving 3 lines overall.
> > > With this new approach that doesn't use token concatenation at all,
> > > you're probably not saving anything at all.
> > > Also, I'm not sure that you need to make the functions inline. The
> > > compiler should be smart enough to not generate functions for
> > > usb_ocp_read_byte etc. You can check with
> > > "make drivers/net/usb/r8152.lst".
> >
> > Vladimir, the purpose of this patch isn't to save lines, but to save us
> > from always writing MCU_TYPE_USB / MCU_TYPE_PLA.
> > It just transforms forms of
> > ocp_read_word(tp, MCU_TYPE_USB, idx);
> > ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
> > into
> > usb_ocp_read_word(tp, idx);
> > pla_ocp_write_dword(tp, idx, val);
> >
> > The fifth patch of this series saves lines by adding _modify functions,
> > to transform
> > val = *_read(idx);
> > val &= ~clr;
> > val |= set;
> > *_write(idx, val);
> > into
> > *_modify(idx, clr, set);
> >
>
> So if the point isn't to save lines, then why don't you go for something
> trivial?
>
> static void ocp_modify_byte(struct r8152 *tp, u16 type, u16 index, u8 clr,
> u8 set)
> {
> u8 val = ocp_read_byte(tp, type, index);
>
> ocp_write_byte(tp, type, index, (val & ~clr) | set);
> }
>
> static void ocp_modify_word(struct r8152 *tp, u16 type, u16 index, u16 clr,
> u16 set)
> {
> u16 val = ocp_read_word(tp, type, index);
>
> ocp_write_word(tp, type, index, (val & ~clr) | set);
> }
>
> static void ocp_modify_dword(struct r8152 *tp, u16 type, u16 index, u32 clr,
> u32 set)
> {
> u32 val = ocp_read_dword(tp, type, index);
>
> ocp_write_dword(tp, type, index, (val & ~clr) | set);
> }
>
> #define pla_ocp_read_byte(tp, index) \
> ocp_read_byte(tp, MCU_TYPE_PLA, index)
> #define pla_ocp_write_byte(tp, index, data) \
> ocp_write_byte(tp, MCU_TYPE_PLA, index, data)
> #define pla_ocp_modify_byte(tp, index, clr, set) \
> ocp_modify_byte(tp, MCU_TYPE_PLA, index, clr, set)
> #define pla_ocp_read_word(tp, index) \
> ocp_read_word(tp, MCU_TYPE_PLA, index)
> #define pla_ocp_write_word(tp, index, data) \
> ocp_write_word(tp, MCU_TYPE_PLA, index, data)
> #define pla_ocp_modify_word(tp, index, clr, set) \
> ocp_modify_word(tp, MCU_TYPE_PLA, index, clr, set)
> #define pla_ocp_read_dword(tp, index) \
> ocp_read_dword(tp, MCU_TYPE_PLA, index)
> #define pla_ocp_write_dword(tp, index, data) \
> ocp_write_dword(tp, MCU_TYPE_PLA, index, data)
> #define pla_ocp_modify_dword(tp, index, clr, set) \
> ocp_modify_dword(tp, MCU_TYPE_PLA, index, clr, set)
>
> #define usb_ocp_read_byte(tp, index) \
> ocp_read_byte(tp, MCU_TYPE_USB, index)
> #define usb_ocp_write_byte(tp, index, data) \
> ocp_write_byte(tp, MCU_TYPE_USB, index, data)
> #define usb_ocp_modify_byte(tp, index, clr, set) \
> ocp_modify_byte(tp, MCU_TYPE_USB, index, clr, set)
> #define usb_ocp_read_word(tp, index) \
> ocp_read_word(tp, MCU_TYPE_USB, index)
> #define usb_ocp_write_word(tp, index, data) \
> ocp_write_word(tp, MCU_TYPE_USB, index, data)
> #define usb_ocp_modify_word(tp, index, clr, set) \
> ocp_modify_word(tp, MCU_TYPE_USB, index, clr, set)
> #define usb_ocp_read_dword(tp, index) \
> ocp_read_dword(tp, MCU_TYPE_USB, index)
> #define usb_ocp_write_dword(tp, index, data) \
> ocp_write_dword(tp, MCU_TYPE_USB, index, data)
> #define usb_ocp_modify_dword(tp, index, clr, set) \
> ocp_modify_dword(tp, MCU_TYPE_USB, index, clr, set)
>
> To my eyes this is easier to digest.
>
> That is, unless you want to go for function pointers and have separate
> structures for PLA and USB...
I thought that static inline functions are preferred to macros, since
compiler warns better if they are used incorrectly...
