Some multigig SFPs from RollBall and Hilink do not expose functional
MDIO access to the internal PHY of the SFP via I2C address 0x56
(although there seems to be read-only clause 22 access on this address).
Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced
Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be
selected to 3 and the password must be filled with 0xff bytes for this
PHY communication to work.
This extends the mdio-i2c driver to support this protocol by adding a
special parameter to mdio_i2c_alloc function via which this RollBall
protocol can be selected.
Signed-off-by: Marek Behún <ka...@kernel.org>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/net/mdio/mdio-i2c.c | 232 +++++++++++++++++++++++++++++++++-
drivers/net/phy/sfp.c | 2 +-
include/linux/mdio/mdio-i2c.h | 8 +-
3 files changed, 235 insertions(+), 7 deletions(-)
diff --git a/drivers/net/mdio/mdio-i2c.c b/drivers/net/mdio/mdio-i2c.c
index 09200a70b315..671c4c750c56 100644
--- a/drivers/net/mdio/mdio-i2c.c
+++ b/drivers/net/mdio/mdio-i2c.c
@@ -3,6 +3,7 @@
* MDIO I2C bridge
*
* Copyright (C) 2015-2016 Russell King
+ * Copyright (C) 2020 Marek Behun
*
* Network PHYs can appear on I2C buses when they are part of SFP module.
* This driver exposes these PHYs to the networking PHY code, allowing
@@ -12,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/mdio/mdio-i2c.h>
#include <linux/phy.h>
+#include <linux/sfp.h>
/*
* I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
@@ -28,7 +30,7 @@ static unsigned int i2c_mii_phy_addr(int phy_id)
return phy_id + 0x40;
}
-static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
+static int i2c_mii_read_default(struct mii_bus *bus, int phy_id, int reg)
{
struct i2c_adapter *i2c = bus->priv;
struct i2c_msg msgs[2];
@@ -62,7 +64,8 @@ static int i2c_mii_read(struct mii_bus *bus, int phy_id, int
reg)
return data[0] << 8 | data[1];
}
-static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+static int i2c_mii_write_default(struct mii_bus *bus, int phy_id, int reg,
+ u16 val)
{
struct i2c_adapter *i2c = bus->priv;
struct i2c_msg msg;
@@ -91,9 +94,210 @@ static int i2c_mii_write(struct mii_bus *bus, int phy_id,
int reg, u16 val)
return ret < 0 ? ret : 0;
}
-struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
+/* RollBall SFPs do not access internal PHY via I2C address 0x56, but
+ * instead via address 0x51, when SFP page is set to 0x03 and password to
+ * 0xffffffff:
+ *
+ * address size contents description
+ * ------- ---- -------- -----------
+ * 0x80 1 CMD 0x01/0x02/0x04 for write/read/done
+ * 0x81 1 DEV Clause 45 device
+ * 0x82 2 REG Clause 45 register
+ * 0x84 2 VAL Register value
+ */
+#define ROLLBALL_PHY_I2C_ADDR 0x51
+#define ROLLBALL_SFP_PASSWORD_ADDR 0x7b
+
+#define ROLLBALL_CMD_ADDR 0x80
+#define ROLLBALL_DATA_ADDR 0x81
+
+#define ROLLBALL_CMD_WRITE 0x01
+#define ROLLBALL_CMD_READ 0x02
+#define ROLLBALL_CMD_DONE 0x04
+
+static int i2c_rollball_mii_poll(struct mii_bus *bus, int bus_addr, u8 *buf,
+ size_t len)
+{
+ struct i2c_adapter *i2c = bus->priv;
+ struct i2c_msg msgs[2];
+ u8 buf0[2], *res;
+ int i, ret;
+
+ buf0[0] = ROLLBALL_CMD_ADDR;
+
+ msgs[0].addr = bus_addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 1;
+ msgs[0].buf = &buf0[0];
+
+ res = buf ? buf : &buf0[1];
+
+ msgs[1].addr = bus_addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = buf ? len : 1;
+ msgs[1].buf = res;
+
+ /* By experiment it takes up to 70 ms to access a register for these
+ * SFPs. Sleep 20ms between iteratios and try 10 times.
+ */
+ i = 10;
+ do {
+ msleep(20);
+
+ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ else if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ if (*res == ROLLBALL_CMD_DONE)
+ return 0;
+ } while (i-- > 0);
+
+ dev_dbg(&bus->dev, "poll timed out\n");
+
+ return -ETIMEDOUT;
+}
+
+static int i2c_rollball_mii_cmd(struct mii_bus *bus, int bus_addr, u8 cmd,
+ u8 *data, size_t len)
+{
+ struct i2c_adapter *i2c = bus->priv;
+ struct i2c_msg msgs[2];
+ u8 cmdbuf[2];
+ int ret;
+
+ msgs[0].addr = bus_addr;
+ msgs[0].flags = 0;
+ msgs[0].len = len;
+ msgs[0].buf = data;
+
+ cmdbuf[0] = ROLLBALL_CMD_ADDR;
+ cmdbuf[1] = cmd;
+
+ msgs[1].addr = bus_addr;
+ msgs[1].flags = 0;
+ msgs[1].len = sizeof(cmdbuf);
+ msgs[1].buf = cmdbuf;
+
+ ret = i2c_transfer(i2c, msgs, 2);
+ if (ret < 0)
+ return ret;
+
+ return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
+}
+
+static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int reg)
+{
+ u8 buf[4], res[6];
+ int bus_addr, ret;
+ u16 val;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EOPNOTSUPP;
+
+ bus_addr = i2c_mii_phy_addr(phy_id);
+ if (bus_addr != ROLLBALL_PHY_I2C_ADDR)
+ return 0xffff;
+
+ buf[0] = ROLLBALL_DATA_ADDR;
+ buf[1] = (reg >> 16) & 0x1f;
+ buf[2] = (reg >> 8) & 0xff;
+ buf[3] = reg & 0xff;
+
+ ret = i2c_rollball_mii_cmd(bus, bus_addr, ROLLBALL_CMD_READ, buf,
+ sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_rollball_mii_poll(bus, bus_addr, res, sizeof(res));
+ if (ret == -ETIMEDOUT)
+ return 0xffff;
+ else if (ret < 0)
+ return ret;
+
+ val = res[4] << 8 | res[5];
+
+ dev_dbg(&bus->dev, "read reg %02x:%04x = %04x\n", (reg >> 16) & 0x1f,
+ reg & 0xffff, val);
+
+ return val;
+}
+
+static int i2c_mii_write_rollball(struct mii_bus *bus, int phy_id, int reg,
+ u16 val)
+{
+ int bus_addr, ret;
+ u8 buf[6];
+
+ if (!(reg & MII_ADDR_C45))
+ return -EOPNOTSUPP;
+
+ bus_addr = i2c_mii_phy_addr(phy_id);
+ if (bus_addr != ROLLBALL_PHY_I2C_ADDR)
+ return 0;
+
+ buf[0] = ROLLBALL_DATA_ADDR;
+ buf[1] = (reg >> 16) & 0x1f;
+ buf[2] = (reg >> 8) & 0xff;
+ buf[3] = reg & 0xff;
+ buf[4] = val >> 8;
+ buf[5] = val & 0xff;
+
+ ret = i2c_rollball_mii_cmd(bus, bus_addr, ROLLBALL_CMD_WRITE, buf,
+ sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_rollball_mii_poll(bus, bus_addr, NULL, 0);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(&bus->dev, "write reg %02x:%04x = %04x\n", (reg >> 16) & 0x1f,
+ reg & 0xffff, val);
+
+ return 0;
+}
+
+static int i2c_mii_init_rollball(struct i2c_adapter *i2c)
+{
+ u8 page_buf[2], pw_buf[5];
+ struct i2c_msg msgs[2];
+ int ret;
+
+ page_buf[0] = SFP_PAGE;
+ page_buf[1] = 3;
+
+ msgs[0].addr = ROLLBALL_PHY_I2C_ADDR;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(page_buf);
+ msgs[0].buf = page_buf;
+
+ pw_buf[0] = ROLLBALL_SFP_PASSWORD_ADDR;
+ pw_buf[1] = 0xff;
+ pw_buf[2] = 0xff;
+ pw_buf[3] = 0xff;
+ pw_buf[4] = 0xff;
+
+ msgs[1].addr = ROLLBALL_PHY_I2C_ADDR;
+ msgs[1].flags = 0;
+ msgs[1].len = sizeof(pw_buf);
+ msgs[1].buf = pw_buf;
+
+ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ else if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ return 0;
+}
+
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
+ enum mdio_i2c_proto protocol)
{
struct mii_bus *mii;
+ int ret;
if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
return ERR_PTR(-EINVAL);
@@ -104,10 +308,28 @@ struct mii_bus *mdio_i2c_alloc(struct device *parent,
struct i2c_adapter *i2c)
snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent));
mii->parent = parent;
- mii->read = i2c_mii_read;
- mii->write = i2c_mii_write;
mii->priv = i2c;
+ switch (protocol) {
+ case MDIO_I2C_ROLLBALL:
+ ret = i2c_mii_init_rollball(i2c);
+ if (ret < 0) {
+ dev_err(parent,
+ "Cannot initialize RollBall MDIO I2C protocol:
%d\n",
+ ret);
+ mdiobus_free(mii);
+ return ERR_PTR(ret);
+ }
+
+ mii->read = i2c_mii_read_rollball;
+ mii->write = i2c_mii_write_rollball;
+ break;
+ default:
+ mii->read = i2c_mii_read_default;
+ mii->write = i2c_mii_write_default;
+ break;
+ }
+
return mii;
}
EXPORT_SYMBOL_GPL(mdio_i2c_alloc);
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 1d18c10e8f82..b1f9fc3a5584 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -409,7 +409,7 @@ static int sfp_i2c_configure(struct sfp *sfp, struct
i2c_adapter *i2c)
sfp->read = sfp_i2c_read;
sfp->write = sfp_i2c_write;
- i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
+ i2c_mii = mdio_i2c_alloc(sfp->dev, i2c, MDIO_I2C_DEFAULT);
if (IS_ERR(i2c_mii))
return PTR_ERR(i2c_mii);
diff --git a/include/linux/mdio/mdio-i2c.h b/include/linux/mdio/mdio-i2c.h
index b1d27f7cd23f..53eedb0dc1d3 100644
--- a/include/linux/mdio/mdio-i2c.h
+++ b/include/linux/mdio/mdio-i2c.h
@@ -11,6 +11,12 @@ struct device;
struct i2c_adapter;
struct mii_bus;
-struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
+enum mdio_i2c_proto {
+ MDIO_I2C_DEFAULT,
+ MDIO_I2C_ROLLBALL,
+};
+
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
+ enum mdio_i2c_proto protocol);
#endif
--
2.26.2
